Infineon SIPMOS® N-Channel MOSFET, 21 mA, 600 V Depletion, 3-Pin SOT-23 BSS126IXTSA1

N° de stock RS:: 236-4397
Référence fabricant:: BSS126IXTSA1
Fabricant:: Infineon

Infineon SIPMOS® N-Channel MOSFET, 21 mA, 600 V Depletion, 3-Pin SOT-23 BSS126IXTSA1

Sous-total (1 bobine de 3000 unités)*

168,00 €

(TVA exclue)

204,00 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

3 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	la bobine*
3000 +	0,056 €	168,00 €

*Prix donné à titre indicatif

N° de stock RS:: 236-4397
Référence fabricant:: BSS126IXTSA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Channel Type	N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	21mA
	Maximum Drain Source Voltage Vds	600V
	Series	SIPMOS®
	Package Type	SOT-23
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	700Ω
	Channel Mode	Depletion
	Maximum Gate Source Voltage Vgs	20V
	Typical Gate Charge Qg @ Vgs	1.4nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	0.5W
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	150°C
	Width	1.4mm
	Standards/Approvals	No
	Height	1.1mm
	Length	3mm
	Automotive Standard	No

	Sélectionner tout
	Marque Infineon
	Channel Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 21mA
	Maximum Drain Source Voltage Vds 600V
	Series SIPMOS®
	Package Type SOT-23
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 700Ω
	Channel Mode Depletion
	Maximum Gate Source Voltage Vgs 20V
	Typical Gate Charge Qg @ Vgs 1.4nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 0.5W
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 150°C
	Width 1.4mm
	Standards/Approvals No
	Height 1.1mm
	Length 3mm
	Automotive Standard No

Datasheet - BSS126IXTSA1

Infineon SIPMOS® Series MOSFET, 600V Maximum Drain Source Voltage, 0.5W Maximum Power Dissipation - BSS126IXTSA1

This MOSFET is a small-signal, N-channel depletion-mode transistor designed for surface-mounted electronics requiring high-voltage switching in Compact footprints. It operates across a wide temperature range and is intended for low-current applications where a depletion-mode device is preferred to provide normally-on behaviour and simplified gate control.

Features and Benefits:

• Maximum drain-source voltage 600 V enables high-voltage switching
• Maximum continuous drain current 21 mA supports low-power circuits
• Maximum drain-source resistance 700 Ω limits on-state conduction
• Forward voltage 1.2 V reduces voltage drop in driven paths
• Typical gate charge 1.4 nC allows modest gate-drive energy
• Maximum power dissipation 0.5 W suits low-power thermal budgets

Applications

• Suitable for high-voltage biasing networks in analogue designs
• Ideal for low-current protection circuits and bleeder resistors
• Used with small-signal drivers requiring depletion-mode behaviour
• Can be used for current steering in sensor front-ends
• Appropriate for Compact power-management subcircuits in converters

What gate voltage range can be applied safely?

A gate-to-source potential up to 20 V is permissible for normal operation.

What thermal range will the device tolerate during use?

It is rated to function between −55 °C and 150 °C for varied environments.

How is the component packaged for PCB assembly?

It is supplied in a SOT-23 surface-mount package suitable for automated placement.

What mechanical envelope should be allowed on the PCB footprint?

The package measures approximately 3 mm length, 1.4 mm width and 1.1 mm height for land-pattern planning.

Does the device meet automotive-grade classification?

It is not specified as an automotive-standard component and should not be assumed to meet those criteria.