Références fabricant

BGA7L1BN6E6327XTSA1 Infineon RF Amplifier Low Noise 13.6 dB, 6-Pin 960 MHz TSNP-6-2

N° de stock RS:: 273-5225
Référence fabricant:: BGA7L1BN6E6327XTSA1
Fabricant:: Infineon

BGA7L1BN6E6327XTSA1 Infineon RF Amplifier Low Noise 13.6 dB, 6-Pin 960 MHz TSNP-6-2

Sous-total (1 bobine de 15000 unités)*

3 420,00 €

(TVA exclue)

4 140,00 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité	la bobine*
15000 +	0,228 €	3 420,00 €

*Prix donné à titre indicatif

N° de stock RS:: 273-5225
Référence fabricant:: BGA7L1BN6E6327XTSA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Operating Frequency	960 MHz
	Product Type	RF Amplifier
	Amplifier Type	Low Noise
	Technology	Silicon Germanium
	Gain	13.6dB
	Mount Type	Surface
	Package Type	TSNP-6-2
	Minimum Supply Voltage	1.5V
	Pin Count	6
	Maximum Supply Voltage	3.6V
	Noise Figure	0.75dB
	Minimum Operating Temperature	-40°C
	Third Order Intercept OIP3	5dBm
	Maximum Operating Temperature	85°C
	Length	1.1mm
	Width	0.7 mm
	Standards/Approvals	JEDEC47/20/22
	Height	0.37mm
	Series	BGA7L1BN6
	Automotive Standard	No

	Sélectionner tout
	Marque Infineon
	Operating Frequency 960 MHz
	Product Type RF Amplifier
	Amplifier Type Low Noise
	Technology Silicon Germanium
	Gain 13.6dB
	Mount Type Surface
	Package Type TSNP-6-2
	Minimum Supply Voltage 1.5V
	Pin Count 6
	Maximum Supply Voltage 3.6V
	Noise Figure 0.75dB
	Minimum Operating Temperature -40°C
	Third Order Intercept OIP3 5dBm
	Maximum Operating Temperature 85°C
	Length 1.1mm
	Width 0.7 mm
	Standards/Approvals JEDEC47/20/22
	Height 0.37mm
	Series BGA7L1BN6
	Automotive Standard No

Datasheet - BGA7L1BN6E6327XTSA1

Pays d'origine :: MY

The Infineon RF Amplifier is a front end low noise amplifier for LTE which covers a wide frequency range from 716 MHz to 960 MHz. The LNA provides 13.6 dB gain and 0. 75 dB noise figure at a current consumption of 4.9 mA. This RF amplifier is base on Silicon Germanium technology. It operates from 1.5 V to 3.6 V supply voltage. The device features a single line two state control and OFF state can be enabled by powering down Vcc.

Pb free package

RoHS compliant

Low noise figure

Digitally on off switch

Low current consumption

Only 1 external SMD component necessary

BGA7L1BN6E6327XTSA1 Infineon RF Amplifier Low Noise 13.6 dB, 6-Pin 960 MHz TSNP-6-2

Liens connexes