Honeywell Technologies HSCDAND015PDSA3 Pressure SensorBoard 8 DIP

N° de stock RS:: 214-1435
Référence fabricant:: HSCDAND015PDSA3
Fabricant:: Honeywell

Honeywell Technologies HSCDAND015PDSA3 Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

2 563,60 €

(TVA exclue)

3 101,95 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 22 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	51,272 €	2 563,60 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1435
Référence fabricant:: HSCDAND015PDSA3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Pressure Sensor
	Maximum Overload Pressure	60psi
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	15 psi
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	+85°C
	Series	HSC
	Standards/Approvals	ISO 9001
	Length	10mm
	Width	13.3mm
	Height	13.75mm
	Minimum Operating Pressure	-15psi
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Product Type Pressure Sensor
	Maximum Overload Pressure 60psi
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 15 psi
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Operating Temperature +85°C
	Series HSC
	Standards/Approvals ISO 9001
	Length 10mm
	Width 13.3mm
	Height 13.75mm
	Minimum Operating Pressure -15psi
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet-HSCDAND015PDSA3

Honeywell HSC Series Differential Pressure Sensor, 3.3V Minimum Supply Voltage, ±0.25% Accuracy - HSCDAND015PDSA3

This differential pressure sensor measures pressure difference between two ports for monitoring and control in systems using non-corrosive, non-ionic gases. It operates from a single low-voltage supply and provides a conditioned output suitable for direct Interface with microcontrollers. The device is intended for board-mount applications where stability, compensated performance and Compact form factor are required.

Features and Benefits:

• ±0.25%FSS accuracy reduces calibration correction requirements
• Operates from 3.3V low-voltage supplies for low-power systems
• Compensated output across 0°C to 50°C for consistent readings
• Rapid update rates support fast measurement and control loops
• High overload tolerance to 60psi protects against pressure spikes
• Wide operating temperature range extends deployment to -20°C-85°C

Applications

• Suitable for airflow monitoring in respiratory and ventilator equipment
• Ideal for clogged HVAC filter detection and VAV control systems
• Used with gas flow instrumentation and chromatography analysers
• Can be used for pressure sensing in oxygen concentrators and nebulisers
• Suitable for industrial barometry and flow calibrator

What electrical Interface options are available for this sensor?

It provides ratiometric analogue and digital outputs with I2C or SPI compatibility and a minimum 12-bit sensor resolution for digital variants.

How does the sensor handle liquids or condensing humidity?

A liquid-media option is available for use on Port 1 only for ranges ≥60mbar, Port 2 is not compatible with liquids and care is needed to avoid particulates.

What mounting and port configurations exist for PCB integration?

The device is a board-mount package available in DIP or SMT forms and can be supplied with single axial barbed or alternative port arrangements.

How does temperature affect measurement stability?

The sensor is temperature compensated for offset and sensitivity, its total error band is specified over the compensated temperature range to limit deviation.

What design measures reduce production handling issues during soldering?

It meets IPC/JEDEC J-STD-020E moisture sensitivity level 1, allowing standard reflow processes without lengthy pre-bake requirements.