Honeywell Technologies HSCDRRN040MD2A3 Pressure SensorBoard 8 DIP

N° de stock RS:: 214-1454
Référence fabricant:: HSCDRRN040MD2A3
Fabricant:: Honeywell

Honeywell Technologies HSCDRRN040MD2A3 Pressure SensorBoard 8 DIP

Sous-total (50 unités, dans une boîte de 50)*

2 994,65 €

(TVA exclue)

3 623,55 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

250 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	59,893 €	2 994,65 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1454
Référence fabricant:: HSCDRRN040MD2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Maximum Overload Pressure	850mbar
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	40 mbar
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Series	HSC
	Width	13.3mm
	Length	10mm
	Standards/Approvals	ISO 9001
	Height	13.75mm
	Minimum Operating Pressure	-40mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Maximum Overload Pressure 850mbar
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 40 mbar
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Series HSC
	Width 13.3mm
	Length 10mm
	Standards/Approvals ISO 9001
	Height 13.75mm
	Minimum Operating Pressure -40mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet-HSCDRRN040MD2A3

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRN040MD2A3

This differential pressure sensor measures pressure difference between two ports for use with non-corrosive, non-ionic gases and selected liquids. It provides a ratiometric analogue or digital output from a single low-voltage supply and is calibrated and temperature-compensated for stable readings across typical industrial and medical operating conditions.

Features and Benefits:

• ±0.25% accuracy reduces software calibration requirements
• Operates from 3.3 to 5V for low-voltage system compatibility
• Dual radial barbed port allows straightforward tubing connections
• Compensated for 0°C to 50°C to maintain output fidelity
• Fast update rates support Rapid measurement and control loops
• Low power consumption minimises battery drain in portable systems

Applications

• Used for airflow monitoring in respiratory equipment
• Suitable for HVAC filter clog detection and VAV control
• Ideal for gas flow instrumentation and chromatography systems
• Can be used for medical ventilator and anaesthesia monitoring
• Used with lab instruments requiring fast differential readings

What electrical Interface options are available?

It offers ratiometric analogue output and 12-14 bit digital outputs compatible with I2C or SPI communications depending on configuration.

What supply voltages are supported and how does output scale?

The device is characterised for single‑supply 3.3V or 5.0V operation and provides a ratiometric output that scales with Vsupply.

How does the sensor handle overpressure events?

It withstands significant overpressure and high burst pressures relative to its range, with overload protection values up to 850 mbar on certain differential ranges.

What diagnostic or protection options exist for fluid applications?

Liquid‑media options are available for Port1 only and diagnostic variants exist, Port2 is not compatible with liquids.

What standards and quality assurances apply to production?

The device is produced under ISO 9001 processes and incorporates on-board ASIC compensation for offset, sensitivity and non-linearity.