Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232

N° de stock RS:: 263-6766
Référence fabricant:: M514R
Fabricant:: Gossen Metrawatt

Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232

Sous-total (1 unité)*

1 484,70 €

(TVA exclue)

1 796,49 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 14 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	1 484,70 €

*Prix donné à titre indicatif

N° de stock RS:: 263-6766
Référence fabricant:: M514R
Fabricant:: Gossen Metrawatt

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Gossen Metrawatt
	Loop Impedance Test Type	3 Wire, 2 Wire
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	Model Number	PROFITEST REMOTE
	RCD Ramp Test	No
	Non-Tripping	No
	Insulation Test Voltage	300V
	Maximum Voltage Measurement	500V
	Test Type	Miniature GPS, Patch
	Earth Resistance Measurement	No
	Downloadable Data	No
	Interface Type	RS232
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Standards/Approvals	part 1, EN 613261:2013, EN 60529 VDE 0470, IEC 610101/EN 610101/ VDE 04111, EN 6132621:2013
	Remote Switch Mode	No
	Width	275mm
	Length	41mm
	Height	21mm
	Weight	1.1kg
	Test Standards	part 1, VDE 0411-1, IEC 61010-1, EN 61010-1, EN 61326-1:2013, EN 61326-2-1:2013, EN 60529 VDE 0470
	IP Rating	IP40
	Safety Category Voltage	300V
	Power Source	5 V RS232
	Battery Type	Rechargeable
	Plug Type	Schuko
	Display Type	LCD
	Safety Category Level	CAT III, CAT IV
	Maximum Operating Temperature	45°C
	Minimum Operating Temperature	5°C

	Sélectionner tout
	Marque Gossen Metrawatt
	Loop Impedance Test Type 3 Wire, 2 Wire
	Product Type Multifunction Tester
	Automatic RCD Test No
	Model Number PROFITEST REMOTE
	RCD Ramp Test No
	Non-Tripping No
	Insulation Test Voltage 300V
	Maximum Voltage Measurement 500V
	Test Type Miniature GPS, Patch
	Earth Resistance Measurement No
	Downloadable Data No
	Interface Type RS232
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Standards/Approvals part 1, EN 613261:2013, EN 60529 VDE 0470, IEC 610101/EN 610101/ VDE 04111, EN 6132621:2013
	Remote Switch Mode No
	Width 275mm
	Length 41mm
	Height 21mm
	Weight 1.1kg
	Test Standards part 1, VDE 0411-1, IEC 61010-1, EN 61010-1, EN 61326-1:2013, EN 61326-2-1:2013, EN 60529 VDE 0470
	IP Rating IP40
	Safety Category Voltage 300V
	Power Source 5 V RS232
	Battery Type Rechargeable
	Plug Type Schuko
	Display Type LCD
	Safety Category Level CAT III, CAT IV
	Maximum Operating Temperature 45°C
	Minimum Operating Temperature 5°C

Pays d'origine :: DE

Gossen-Metrawatt Multifunction Tester, 1.1kg Weight, 300V Insulation Test Voltage - M514R

This multifunction tester is a portable electrical tester designed for field measurements and diagnostic checks across installation and maintenance tasks. It operates within a controlled temperature range and connects via RS232 for data transfer. The instrument is powered by a rechargeable battery and is intended for use where equipment meeting recognised electrical and EMC standards is required.

Features and Benefits:

• *Made in Germany
• 300 V Insulation Test Voltage ensures safe low-voltage dielectric checks
• 500 V Maximum Voltage Measurement enables broader voltage diagnostics
• 1.6 mA Continuity Test Current provides realistic loop and conductor verification
• CAT III and CAT IV Safety Category permits testing in higher-risk installations
• IP40 Rating offers protection against common workshop particulates

Applications

• Suitable for verifying RCD Type A functionality in installations
• Ideal for loop impedance 2‑wire and 3‑wire tester procedures
• Used for insulation tester 300 V and 500 V measurement during commissioning
• Can be used with Schuko connections for portable continuity testing
• Used in environments requiring electrical safety tester compliance with EN 61010-1

What temperature range is appropriate for operation?

The instrument functions between 5 °C and 45 °C.

Which Interface is provided for connection to external systems?

It uses an RS232 Interface and operates from a 5 V RS232 power source.

What test types for RCD and loop impedance does it support?

It supports Type A RCD tests and both 2‑wire and 3‑wire loop impedance tests.

How portable is the unit for site work?

The unit weighs 1.1 kg and is powered by a rechargeable battery for transportable use.

What standards and approvals does the instrument meet?

It conforms to multiple standards including EN 61010-1 and EN 61326-1 among others.