Electrical Test & Measurement

You'll find an excellent range of electrical installation testing equipment from us. Among the products, you'll find earth and ground resistance testers, insulation testers and loop impedance testers, plus a full range of accessories.

Why do you need electrical installation testers?

Electric installation testers and their various accessories are designed to keep you safe and to ensure that wiring is up to government standard. To be considered a safe environment all wiring and electrical equipment should be checked and undergo rigid quality control through the use of multifunction tester of electrical testers.

We carry electrical installation testers, accessories and software altogether in one place, we carry a wide range of electric installation testers with a safety category range of CAT II to CAT IV.

Why does insulation need to be tested?

Insulation testers test the insulation resistance of the material that is being used to insulate cabling this is usually done at double the level of resistance for the material in many countries standards and safety agencies have specified this is a universal test and all products must be tested this test is often done after every maintenance procedure or repair. Insulation needs to be tested to check that it can cope with power surges and prevent fires.

What are RCDs and Why do they need to be tested?

RCDs are usually built in devices that measure residual current, they are designed to trip if the residual current becomes too high, they are designed to protect you from electric fires or from electrocution this is done to be in accordance with BS7671

What is BS7671?

BS7671 is the strict set of regulations that are enforced in the UK, these have been in place since 1882 and have had many editions and amendments over the years, lots of countries have based their regulations of the UK regs. We carry some multimeters which can carry out all the tests required for certification in industrial, commercial and domestic wiring.

Books
Books
Cable Avoidance Tools
Cable Avoidance Tools
Cable Tracers & Fuse Finders
Cable Tracers & Fuse Finders
Calibration Checkboxes
Calibration Checkboxes
Clamp Meters
Clamp Meters
Continuity Testers
Continuity Testers
EV Charger Test Adapters
EV Charger Test Adapters
Earth Testers
Earth Testers
Electrical Installation Certificates
Electrical Installation Certificates
Electrical Test & Measurement Accessories
Electrical Test & Measurement Accessories
Insulation Tester Accessories
Insulation Tester Accessories
Insulation Testers
Insulation Testers
Loop & RCD Testers
Loop & RCD Testers
Loop Calibrators
Loop Calibrators
Multi Function Calibrators
Multi Function Calibrators
Multifunction Tester Accessories
Multifunction Tester Accessories
Multifunction Testers
Multifunction Testers
Non Contact Voltage & Magnetic Field Indicators
Non Contact Voltage & Magnetic Field Indicators
PAT Tester Accessories
PAT Tester Accessories
PAT Testers
PAT Testers
Phase Rotation Testers
Phase Rotation Testers
Power Meters
Power Meters
Proving Units
Proving Units
Socket Testers
Socket Testers
Stud Finders & Wall Scanners
Stud Finders & Wall Scanners
Transformer Turns Ratio Meters
Transformer Turns Ratio Meters
Voltage Testers
Voltage Testers

2071 Produits présentés pour Electrical Test & Measurement

Trier par
1 sur 104
Stock limité
Fluke CABLE REEL 25M BL Ground Earth Cable Reel, For Use With 1623 Series, 1625 Series
  • N° de stock RS 798-3971
  • Référence fabricant CABLE REEL 25M BL
Sous-total (1 unité)
109,00 €(TVA exclue)
109,00 €/unité
En stock
Fluke 325 Clamp Meter 400 A 600 V ac CAT IV, CAT III Non-Contact Voltage Detector
  • N° de stock RS 765-3660
  • Référence fabricant FLUKE 325
Sous-total (1 unité)
299,00 €(TVA exclue)
299,00 €/unité
En stock
Fluke 1507 Insulation & Continuity Tester, 50 V Min, 1 kV Max, 10 GΩ CAT IV
  • N° de stock RS 518-6008
  • Référence fabricant FLUKE 1507
Sous-total (1 unité)
793,00 €(TVA exclue)
793,00 €/unité
En stock
Martindale TEK402 Continuity Tester 50μA LED, Model TEK 402
  • N° de stock RS 255-604
  • Référence fabricant TEK402
Sous-total (1 unité)
47,17 €(TVA exclue)
47,17 €/unité
En stock
Druck UPS4E Loop Calibrator, RSCAL
  • N° de stock RS 639-654
  • Référence fabricant UPS4E
Sous-total (1 unité)
1 123,03 €(TVA exclue)
1 123,03 €/unité
Stock limité
Fluke T5-RLS Test Lead, For Use With T5-1000, T5-600
  • N° de stock RS 754-1246
  • Référence fabricant T5-RLS
Sous-total (1 unité)
41,00 €(TVA exclue)
41,00 €/unité
En stock
Fluke 376 FC Clamp Meter, 999.9 A 999.9 A ac 1000 V dc 1000 V ac CAT III, CAT IV Non-Contact Voltage Detector
  • N° de stock RS 905-5914
  • Référence fabricant FLUKE-376 FC
Sous-total (1 unité)
689,00 €(TVA exclue)
689,00 €/unité
Stock limité
Fluke T130, LCD Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT IV, CAT III, FLUKE T130
  • N° de stock RS 750-8435
  • Référence fabricant FLUKE T130
Sous-total (1 unité)
192,00 €(TVA exclue)
192,00 €/unité
En stock
RS PRO Magnetic Field Detector 3 mT 1000 V ac
  • N° de stock RS 375-5422
Sous-total (1 unité)
38,33 €(TVA exclue)
38,33 €/unité
En stock
Chauvin Arnoux P01103063 Test Probe, For Use With C.A 6250 Microhmmeter, C.A 6240 Microhmmeter
  • N° de stock RS 231-3632
  • Référence fabricant P01103063
Sous-total (1 unité)
436,32 €(TVA exclue)
436,32 €/unité
En stock
Penta TAG780RIFE, LED Voltage Indicator, 1000V ac/dc Continuity Check CAT IV, TAG780RIFE
  • N° de stock RS 230-9609
  • Référence fabricant TAG780RIFE
Sous-total (1 unité)
157,15 €(TVA exclue)
157,15 €/unité
En stock
Chauvin Arnoux CM604 Digital Clamp Multimeter 400 A 600 V dc 600 V ac CAT III Non-Contact Voltage Detector
  • N° de stock RS 270-7773
  • Référence fabricant P06232009Z
Sous-total (1 unité)
129,28 €(TVA exclue)
129,28 €/unité
En stock
Extech 380396 Insulation Tester, 500 V Min, 5 kV Max, 60 GΩ CAT IV
  • N° de stock RS 288-0114
  • Référence fabricant 380396
Sous-total (1 unité)
899,00 €(TVA exclue)
899,00 €/unité
Stock limité
Fluke T150, LCD Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT III, CAT IV, FLUKE T150
  • N° de stock RS 750-8444
  • Référence fabricant FLUKE T150
Sous-total (1 unité)
221,00 €(TVA exclue)
221,00 €/unité
En stock
RS PRO RS 135 Multi-Function Calibrator, 24 mA, 24V 214 mm 98.7 mm 56mm
  • N° de stock RS 174-9557
Sous-total (1 unité)
332,31 €(TVA exclue)
332,31 €/unité
En stock
Catu DT-155 Multifunction Tester Earth Resistance Measurement
  • N° de stock RS 309-5758
  • Référence fabricant DT-155
Sous-total (1 unité)
275,63 €(TVA exclue)
275,63 €/unité
En stock
Kewtech Corporation KEW4105A Earth Tester, 2 kΩ
  • N° de stock RS 477-805
  • Référence fabricant KEW4105A
Sous-total (1 unité)
380,07 €(TVA exclue)
380,07 €/unité
En stock
RS PRO Clamp Meter, 400 A dc 400 A ac CAT III
  • N° de stock RS 360-187
Sous-total (1 unité)
77,29 €(TVA exclue)
77,29 €/unité
Stock limité
Fluke LVD2 Non-Contact Voltage Detector
  • N° de stock RS 336-328
  • Référence fabricant LVD2
Sous-total (1 unité)
66,00 €(TVA exclue)
66,00 €/unité
En stock
Megger MIT410 2 Insulation Tester, 10 V Min, 1 kV Max, 200 GΩ CAT IV
  • N° de stock RS 921-4514
  • Référence fabricant 1004-735
Sous-total (1 unité)
765,00 €(TVA exclue)
765,00 €/unité
1
2
3
104
Résultats par page

Liens connexes