Gossen Metrawatt PROFITEST PRIME Starter Package Multifunction Tester 1kV With USB
- N° de stock RS:
- 263-6762
- Référence fabricant:
- M516k
- Fabricant:
- Gossen Metrawatt
Sous-total (1 unité)*
5 572,81 €
(TVA exclue)
6 743,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 5 572,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 263-6762
- Référence fabricant:
- M516k
- Fabricant:
- Gossen Metrawatt
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gossen Metrawatt | |
| Loop Impedance Test Type | 2 Wire, 3 Wire | |
| Product Type | Multifunction Tester | |
| Automatic RCD Test | Yes | |
| RCD Ramp Test | Yes | |
| Model Number | PROFITEST PRIME Starter Package | |
| Non-Tripping | No | |
| Insulation Test Voltage | 1kV | |
| Maximum Voltage Measurement | 230V | |
| Earth Resistance Measurement | No | |
| Downloadable Data | No | |
| Interface Type | USB | |
| Continuity Test Current | 1.6mA | |
| RCD Test Type | Type A | |
| Weight | 10kg | |
| Length | 41mm | |
| Remote Switch Mode | Yes | |
| Height | 21mm | |
| Width | 50mm | |
| Standards/Approvals | IEC 603646, RoHS, EN 501101 | |
| Test Standards | DIN VDE 0100-600, EN 61010 | |
| IP Rating | IP40 | |
| Display Type | LCD | |
| Battery Type | Rechargeable | |
| Maximum Operating Temperature | 40°C | |
| Minimum Operating Temperature | 0°C | |
| Power Source | Battery | |
| Safety Category Level | CAT IV, CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque Gossen Metrawatt | ||
Loop Impedance Test Type 2 Wire, 3 Wire | ||
Product Type Multifunction Tester | ||
Automatic RCD Test Yes | ||
RCD Ramp Test Yes | ||
Model Number PROFITEST PRIME Starter Package | ||
Non-Tripping No | ||
Insulation Test Voltage 1kV | ||
Maximum Voltage Measurement 230V | ||
Earth Resistance Measurement No | ||
Downloadable Data No | ||
Interface Type USB | ||
Continuity Test Current 1.6mA | ||
RCD Test Type Type A | ||
Weight 10kg | ||
Length 41mm | ||
Remote Switch Mode Yes | ||
Height 21mm | ||
Width 50mm | ||
Standards/Approvals IEC 603646, RoHS, EN 501101 | ||
Test Standards DIN VDE 0100-600, EN 61010 | ||
IP Rating IP40 | ||
Display Type LCD | ||
Battery Type Rechargeable | ||
Maximum Operating Temperature 40°C | ||
Minimum Operating Temperature 0°C | ||
Power Source Battery | ||
Safety Category Level CAT IV, CAT III | ||
- Pays d'origine :
- DE
Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 1000V Insulation Test Voltage - M516k
This multifunction tester is a portable electrical instrument designed for verification of protective devices and insulation in low-voltage installations. It operates from a rechargeable battery and is intended for on-site use where measurement of voltage, insulation and RCD performance is required. The unit complies with relevant electrical wiring and test standards and provides a rugged IP40-rated enclosure for field environments.
Features and Benefits:
• *Made in Germany
• 1000 V insulation test voltage provides high-voltage dielectric checks
• 1.6 mA continuity test current yields measurable low-resistance verification
• RCD ramp test capability enables assessment of trip thresholds
• Loop impedance 2‑wire/3‑wire tester supports both common loop methods
• USB Interface allows straightforward data transfer to external systems
• 1000 V insulation test voltage provides high-voltage dielectric checks
• 1.6 mA continuity test current yields measurable low-resistance verification
• RCD ramp test capability enables assessment of trip thresholds
• Loop impedance 2‑wire/3‑wire tester supports both common loop methods
• USB Interface allows straightforward data transfer to external systems
Applications
• Suitable for testing RCD Type A behaviour on installations
• Used for insulation verification on cables and equipment
• Ideal for loop impedance checks during installation verification
• Can be used for continuity tests in electrical maintenance
• Suitable for portable automatic RCD test instrument workflows
• Used for insulation verification on cables and equipment
• Ideal for loop impedance checks during installation verification
• Can be used for continuity tests in electrical maintenance
• Suitable for portable automatic RCD test instrument workflows
What supply does it use for field operation?
It runs from an internal rechargeable battery allowing untethered measurements.
Which safety categories does it support for on-site testing?
It is rated for CAT IV and CAT III environments with a 300 V safety‑category voltage.
What environmental conditions must be observed during use?
It is designed to operate between +5 °C and +50 °C and has IP40 ingress protection.
Which standards describe its test and measurement conformity?
It is aligned with IEC 60364, DIN VDE 0100‑600 and EN 61010 for measurement methods and safety.
Liens connexes
- Gossen Metrawatt PROFiTEST PRIME Multifunction Tester 50V With USB
- Gossen Metrawatt Z506Z HV-P Profitest Prime
- Gossen Metrawatt PROFITEST PVSUN Multifunction Tester 1000V Earth Resistance Measurement With USB 2.0
- Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232
- Gossen Metrawatt PROFITEST EMOBILITY Multifunction Tester 50V With Bluetooth
- Gossen Metrawatt PROFiTEST INTRO Electrical Tester Earth Resistance Measurement
- Gossen Metrawatt PROFiTEST MTECH+IQ EV Basic Packet Multifunction Tester Set
- Gossen Metrawatt Z506H Profitest Clip