Gossen Metrawatt PROFiTEST PRIME Multifunction Tester 50V With USB
- N° de stock RS:
- 260-8278
- Référence fabricant:
- M516G
- Fabricant:
- Gossen Metrawatt
Sous-total (1 unité)*
4 983,13 €
(TVA exclue)
6 029,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 04 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 4 983,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-8278
- Référence fabricant:
- M516G
- Fabricant:
- Gossen Metrawatt
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gossen Metrawatt | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | 2 Wire, 3 Wire | |
| Automatic RCD Test | Yes | |
| Model Number | PROFiTEST PRIME | |
| RCD Ramp Test | Yes | |
| Non-Tripping | Yes | |
| Insulation Test Voltage | 50V | |
| Maximum Voltage Measurement | 230V | |
| Earth Resistance Measurement | No | |
| Downloadable Data | No | |
| Interface Type | USB | |
| Continuity Test Current | 1.6mA | |
| RCD Test Type | Type A | |
| Height | 21mm | |
| Remote Switch Mode | Yes | |
| Width | 50mm | |
| Weight | 10kg | |
| Length | 41mm | |
| Standards/Approvals | EN 501101, IEC 603646, RoHS | |
| IP Rating | IP40 | |
| Test Standards | DIN VDE 0100-600, EN 61010 | |
| Battery Type | Rechargeable | |
| Power Source | Battery | |
| Safety Category Level | CAT IV, CAT III | |
| Maximum Operating Temperature | 40°C | |
| Display Type | LCD | |
| Minimum Operating Temperature | 0°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Gossen Metrawatt | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type 2 Wire, 3 Wire | ||
Automatic RCD Test Yes | ||
Model Number PROFiTEST PRIME | ||
RCD Ramp Test Yes | ||
Non-Tripping Yes | ||
Insulation Test Voltage 50V | ||
Maximum Voltage Measurement 230V | ||
Earth Resistance Measurement No | ||
Downloadable Data No | ||
Interface Type USB | ||
Continuity Test Current 1.6mA | ||
RCD Test Type Type A | ||
Height 21mm | ||
Remote Switch Mode Yes | ||
Width 50mm | ||
Weight 10kg | ||
Length 41mm | ||
Standards/Approvals EN 501101, IEC 603646, RoHS | ||
IP Rating IP40 | ||
Test Standards DIN VDE 0100-600, EN 61010 | ||
Battery Type Rechargeable | ||
Power Source Battery | ||
Safety Category Level CAT IV, CAT III | ||
Maximum Operating Temperature 40°C | ||
Display Type LCD | ||
Minimum Operating Temperature 0°C | ||
- Pays d'origine :
- DE
Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 50V Insulation Test Voltage - M516G
This multifunction tester is a portable, battery-operated instrument designed for comprehensive electrical installation verification and protection device assessment. It combines loop impedance, RCD testing and insulation/continuity checks for field technicians. The unit operates within a wide ambient range and connects to external tools via a USB interface.
Features and Benefits:
• *Made in Germany
• CAT IV/CAT III electrical tester for high-safety site testing
• Loop impedance 2-wire/3-wire tester enabling versatile circuit checks
• RCD Type A ramp test multifunction tester for sensitive device evaluation
• Non-tripping continuity tester 1.6 mA reduces nuisance tripping during faults
• Rechargeable insulation/continuity tester 50 V allowing repeated field use
• CAT IV/CAT III electrical tester for high-safety site testing
• Loop impedance 2-wire/3-wire tester enabling versatile circuit checks
• RCD Type A ramp test multifunction tester for sensitive device evaluation
• Non-tripping continuity tester 1.6 mA reduces nuisance tripping during faults
• Rechargeable insulation/continuity tester 50 V allowing repeated field use
Applications
• Suitable for on-site periodic electrical installation verification
• Used for commissioning protective devices in distribution boards
• Ideal for testing RCDs requiring ramp and automatic sequences
• Can be used for continuity checks without causing circuit trips
• Used with portable setups where USB data transfer is required
• Used for commissioning protective devices in distribution boards
• Ideal for testing RCDs requiring ramp and automatic sequences
• Can be used for continuity checks without causing circuit trips
• Used with portable setups where USB data transfer is required
What safety category and voltage rating does it support?
It is rated for CAT IV and CAT III use and supports measurements up to 300 V safety-category voltage.
How does the unit perform RCD testing automatically?
It executes automatic RCD tests including ramp profiles for Type A devices and supports remote switch control during test sequences.
What environmental conditions allow reliable operation?
The instrument is specified to operate between +5 °C and +50 °C and has an ingress protection rating of IP40.
How is data transferred from the device?
Data can be extracted using the built-in USB Interface for connection to compatible systems.
What are the power and portability characteristics?
It runs from a rechargeable battery, is battery-powered for field use and weighs 10.15 kg.
Liens connexes
- Gossen Metrawatt PROFITEST PRIME Starter Package Multifunction Tester 1000V With USB
- Gossen Metrawatt PROFITEST EMOBILITY Multifunction Tester 50V With Bluetooth
- Gossen Metrawatt Z506Z HV-P Profitest Prime
- Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232
- Gossen Metrawatt PROFITEST PVSUN Multifunction Tester 1000V Earth Resistance Measurement With USB 2.0
- Gossen Metrawatt PROFiTEST MF TECH Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA - LEMONGREEN Multifunction Tester 600V Earth Resistance Measurement With USB