Fluke 1662 Multifunction Tester 1000V With Wireless

N° de stock RS:: 117-6672
Numéro d'article Distrelec:: 300-60-454
Référence fabricant:: FLK-1662 DE
Fabricant:: Fluke

Fluke 1662 Multifunction Tester 1000V With Wireless

Sous-total (1 unité)*

1 073,00 €

(TVA exclue)

1 298,33 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

51 unité(s) expédiée(s) à partir du 05 octobre 2026
Plus 35 unité(s) expédiée(s) à partir du 12 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	1 073,00 €

*Prix donné à titre indicatif

N° de stock RS:: 117-6672
Numéro d'article Distrelec:: 300-60-454
Référence fabricant:: FLK-1662 DE
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Product Type	Multifunction Tester
	Loop Impedance Test Type	Phase to Earth, Phase to Neutral
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number	1662
	Insulation Test Voltage	1000V
	Maximum Voltage Measurement	1000V
	Test Type	Resistance, Phase Sequence Test, Continuity, RCD Test, MOSFET, Voltage, Insulation Resistance, Wiring Polarity, Miniature GPS, Frequency
	Downloadable Data	Yes
	Interface Type	Wireless
	Continuity Test Current	1mA
	RCD Test Type	Type A, AC, Type G, Type S
	Weight	1.3kg
	Standards/Approvals	CE, EN/IEC 610102034, CSA, EN/IEC 610101
	Remote Switch Mode	Yes
	Height	125mm
	Length	100mm
	Width	250mm
	Test Standards	EN 61557-7, EN 61557-10, EN 61557-1
	IP Rating	IP40
	Plug Type	EU
	Battery Type	AA
	Safety Category Voltage	500V, 300V
	Display Type	LCD
	Power Source	Battery
	Safety Category Level	CAT III, CAT IV
	Maximum Continuity Resistance	2000Ω
	Minimum Continuity Resistance	20Ω

	Sélectionner tout
	Marque Fluke
	Product Type Multifunction Tester
	Loop Impedance Test Type Phase to Earth, Phase to Neutral
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number 1662
	Insulation Test Voltage 1000V
	Maximum Voltage Measurement 1000V
	Test Type Resistance, Phase Sequence Test, Continuity, RCD Test, MOSFET, Voltage, Insulation Resistance, Wiring Polarity, Miniature GPS, Frequency
	Downloadable Data Yes
	Interface Type Wireless
	Continuity Test Current 1mA
	RCD Test Type Type A, AC, Type G, Type S
	Weight 1.3kg
	Standards/Approvals CE, EN/IEC 610102034, CSA, EN/IEC 610101
	Remote Switch Mode Yes
	Height 125mm
	Length 100mm
	Width 250mm
	Test Standards EN 61557-7, EN 61557-10, EN 61557-1
	IP Rating IP40
	Plug Type EU
	Battery Type AA
	Safety Category Voltage 500V, 300V
	Display Type LCD
	Power Source Battery
	Safety Category Level CAT III, CAT IV
	Maximum Continuity Resistance 2000Ω
	Minimum Continuity Resistance 20Ω

Statut RoHS : Exempté

Pays d'origine :: GB

Fluke Multifunction Tester, 500V Safety Category Voltage, 1000V Maximum Voltage Measurement - FLK-1662 DE

This multifunction tester is a portable installation instrument designed to verify electrical safety and wiring in domestic, commercial and industrial environments using battery power and wireless data transfer. It performs insulation, continuity, loop impedance, RCD and voltage measurements to confirm compliance with EN61557 test standards while offering an insulation pre-test that halts if appliances are detected during measurement.

Features and Benefits:

• 1000 V insulation resistance with pre-test protection prevents appliance damage
• Continuity tester 1 mA delivers measurements up to 2000 Ω for low-current circuits
• RCD tester Type A AC Type S supports automatic and ramp trip testing
• Loop impedance phase-to-earth tester computes PEFC and PSC for fault analysis
• CAT III/CAT IV electrical safety tester rated for 500 V and 300 V overvoltage environments
• Wireless downloadable data tester EU plug enables direct upload to the Cloud

Applications

• Suitable for verifying fixed wiring to IEC 60364 requirements
• Ideal for testing EV charging station DC protection devices
• Used with smartphones for remote result sharing and collaboration
• Can be used for on-site prospective earth fault current measurements
• Suitable for commissioning and maintenance of domestic installations

What power source does it use?

It operates from six 1.5 V AA batteries providing field-replaceable power.

How does it prevent damage during insulation tests?

An insulation pre-test detects connected appliances and halts the insulation routine with audible and Visual warnings.

Which interfaces are available for data transfer?

It features wireless connectivity and an IR-USB/BLE Interface for optional data-management software integration.

What protection rating and ingress resistance does it provide?

The instrument conforms to IP40 sealing and meets safety standards for CAT IV 300 V and CAT III 500 V environments.

Which test standards and measurement types are supported?

It complies with EN 61557 parts 1, 7 and 10 and performs resistance, continuity, insulation, voltage, frequency, phase sequence, MOSFET and RCD tests.