Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB
- N° de stock RS:
- 117-6678
- Numéro d'article Distrelec:
- 300-60-472
- Référence fabricant:
- FLK-1664FC DE
- Fabricant:
- Fluke
Sous-total (1 unité)*
2 459,00 €
(TVA exclue)
2 975,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 17 unité(s) expédiée(s) à partir du 03 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 459,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 117-6678
- Numéro d'article Distrelec:
- 300-60-472
- Référence fabricant:
- FLK-1664FC DE
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | Phase to Neutral, Phase to Earth | |
| Automatic RCD Test | Yes | |
| RCD Ramp Test | Yes | |
| Model Number | 1664FC | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 500V ac/dc | |
| Test Type | Insulation Resistance, Frequency, Miniature GPS, Wiring Polarity, MOSFET, Continuity, Resistance, RCD Test, Voltage, Phase Sequence Test | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 1mA | |
| RCD Test Type | Type S, AC, Type G | |
| Standards/Approvals | EN/IEC 610102034, EN/IEC 610101, CSA, CE | |
| Length | 100mm | |
| Width | 250mm | |
| Height | 125mm | |
| Remote Switch Mode | Yes | |
| Weight | 1.3kg | |
| IP Rating | IP40 | |
| Test Standards | EN, IEC 61010-2-034, IEC 61010-1 | |
| Safety Category Level | CAT IV, CAT III | |
| Battery Type | AA | |
| Display Type | LCD | |
| Maximum Continuity Resistance | 2000Ω | |
| Power Source | Battery | |
| Minimum Continuity Resistance | 20Ω | |
| Safety Category Voltage | 300, 500V | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type Phase to Neutral, Phase to Earth | ||
Automatic RCD Test Yes | ||
RCD Ramp Test Yes | ||
Model Number 1664FC | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 500V ac/dc | ||
Test Type Insulation Resistance, Frequency, Miniature GPS, Wiring Polarity, MOSFET, Continuity, Resistance, RCD Test, Voltage, Phase Sequence Test | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 1mA | ||
RCD Test Type Type S, AC, Type G | ||
Standards/Approvals EN/IEC 610102034, EN/IEC 610101, CSA, CE | ||
Length 100mm | ||
Width 250mm | ||
Height 125mm | ||
Remote Switch Mode Yes | ||
Weight 1.3kg | ||
IP Rating IP40 | ||
Test Standards EN, IEC 61010-2-034, IEC 61010-1 | ||
Safety Category Level CAT IV, CAT III | ||
Battery Type AA | ||
Display Type LCD | ||
Maximum Continuity Resistance 2000Ω | ||
Power Source Battery | ||
Minimum Continuity Resistance 20Ω | ||
Safety Category Voltage 300, 500V | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1664FC DE
This multifunction tester provides essential installation diagnostics for electricians and engineers working in automation, electronics and mechanical environments. It performs insulation, continuity, loop and RCD assessments alongside voltage and frequency checks, offering a compact, battery-powered instrument for on-site verification and fault analysis.
Features & Benefits
• Insulation tester 1000V delivers up to 1000V for insulation measurement and high-resistance detection
• Portable continuity tester 1mA uses 1mA test current for sensitive conductor checks
• Loop impedance tester phase to earth offers L-PE and L-N loop assessment for PSC/PEFC calculation
• RCD ramp test tester performs stepped ramp tests from 30% to 110% of rated current
• Multifunction electrician tester 500V measures AC/DC voltages to 500V with 0.8% accuracy
• CAT IV 300V CAT III 500V tester provides overvoltage protection for varied installation tiers
• Portable continuity tester 1mA uses 1mA test current for sensitive conductor checks
• Loop impedance tester phase to earth offers L-PE and L-N loop assessment for PSC/PEFC calculation
• RCD ramp test tester performs stepped ramp tests from 30% to 110% of rated current
• Multifunction electrician tester 500V measures AC/DC voltages to 500V with 0.8% accuracy
• CAT IV 300V CAT III 500V tester provides overvoltage protection for varied installation tiers
**Applications**
• Suitable for commissioning and periodic inspection of electrical installations
• Ideal for motor winding continuity and resistance verification
• Used for on-site RCD performance validation including tripping time measurement
• Can be used for calculating prospective earth fault and short-circuit currents
• Used with distribution boards for wiring polarity and phase-sequence checks
• Ideal for motor winding continuity and resistance verification
• Used for on-site RCD performance validation including tripping time measurement
• Can be used for calculating prospective earth fault and short-circuit currents
• Used with distribution boards for wiring polarity and phase-sequence checks
How is data exported for reporting and analysis?
The instrument includes a USB Interface enabling downloadable data transfer to a PC for Record keeping and post-test review.
What power source and battery life provisions are used for fieldwork?
It operates from six AA batteries, supporting portable use without mains power and simplifying battery replacement.
Which RCD types and test modes are supported during protection verification?
The tester exercises Type A, AC, G and S RCDs, providing variable current, tripping time and ramp-step measurements for each type.
How does it compensate for test leads and mains cord resistance?
A dedicated zero adaptor and lead compensation routine allow accurate loop and continuity results by offsetting lead and cord influences.
What environmental sealing and safety standards does it meet?
The unit has IP40 ingress protection and complies with EN/IEC 61010 series and EN 61557 performance requirements.
Liens connexes
- Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1664FC SCH FTT KIT Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1664FC DE Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1663 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke SMFT-1000 Multifunction Tester 1000V Earth Resistance Measurement With Wireless
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, RSCAL
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, UKAS