Fluke 1662 Multifunction Tester 1000V With Wireless
- N° de stock RS:
- 117-6665
- Numéro d'article Distrelec:
- 300-60-456
- Référence fabricant:
- FLK-1662 SCH
- Fabricant:
- Fluke
Sous-total (1 unité)*
1 043,00 €
(TVA exclue)
1 262,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 043,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 117-6665
- Numéro d'article Distrelec:
- 300-60-456
- Référence fabricant:
- FLK-1662 SCH
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | Phase to Earth, Phase to Neutral | |
| Automatic RCD Test | Yes | |
| Model Number | 1662 | |
| RCD Ramp Test | Yes | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 1000V | |
| Test Type | Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET | |
| Interface Type | Wireless | |
| Continuity Test Current | 1mA | |
| RCD Test Type | Type A, AC, Type G, Type S | |
| Battery Life | 200h | |
| Height | 125mm | |
| Remote Switch Mode | Yes | |
| Length | 100mm | |
| Weight | 1.3kg | |
| Standards/Approvals | CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102) | |
| Width | 250mm | |
| Test Standards | IEC 60364 | |
| IP Rating | IP40 | |
| Safety Category Voltage | 500, 300V | |
| Power Source | Battery | |
| Display Type | LCD | |
| Battery Type | AA | |
| Minimum Continuity Resistance | 20Ω | |
| Safety Category Level | CAT III, CAT IV | |
| Maximum Continuity Resistance | 2000Ω | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type Phase to Earth, Phase to Neutral | ||
Automatic RCD Test Yes | ||
Model Number 1662 | ||
RCD Ramp Test Yes | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 1000V | ||
Test Type Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET | ||
Interface Type Wireless | ||
Continuity Test Current 1mA | ||
RCD Test Type Type A, AC, Type G, Type S | ||
Battery Life 200h | ||
Height 125mm | ||
Remote Switch Mode Yes | ||
Length 100mm | ||
Weight 1.3kg | ||
Standards/Approvals CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102) | ||
Width 250mm | ||
Test Standards IEC 60364 | ||
IP Rating IP40 | ||
Safety Category Voltage 500, 300V | ||
Power Source Battery | ||
Display Type LCD | ||
Battery Type AA | ||
Minimum Continuity Resistance 20Ω | ||
Safety Category Level CAT III, CAT IV | ||
Maximum Continuity Resistance 2000Ω | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1662 SCH
This multifunction tester is a portable electrical diagnostic instrument designed for comprehensive verification of circuits and protective devices across industrial and commercial sites. It supports a broad range of electrical measurements, from voltage and frequency checks to RCD and insulation evaluations, and is intended for use where fast, accurate assessment of wiring, protection and continuity is required.
Features & Benefits
• Measures up to 500V AC/DC enabling high-voltage verification
• Insulation tests to 1000V for robust fault finding
• RCD ramp and automatic tests for precise trip characterisation
• Continuity current of 1mA for sensitive continuity assessments
• Wireless Interface enabling remote switching and data transfer
• MOSFET-based continuity and resistance testing for stable outputs
• Insulation tests to 1000V for robust fault finding
• RCD ramp and automatic tests for precise trip characterisation
• Continuity current of 1mA for sensitive continuity assessments
• Wireless Interface enabling remote switching and data transfer
• MOSFET-based continuity and resistance testing for stable outputs
**Applications**
• Suitable for commissioning power distribution and protective devices
• Ideal for verifying RCD performance during periodic testing
• Used for insulation resistance measurements on motors and cables
• Can be used for loop impedance checks phase to earth on installations
• Suitable for fieldwork where battery operation and portability are required
• Ideal for verifying RCD performance during periodic testing
• Used for insulation resistance measurements on motors and cables
• Can be used for loop impedance checks phase to earth on installations
• Suitable for fieldwork where battery operation and portability are required
What power source does it use for field operations?
It runs on AA batteries and provides extended operation with a rated battery life of 200 h.
Which safety categories does it meet for live work?
It is rated to work within CAT III and CAT IV environments at 500V and 300V respectively.
How does the device handle loop impedance measurements?
Loop impedance testing covers phase-to-earth and phase-to-neutral modes to identify prospective fault currents and verify protective conductors.
What environmental protection does the enclosure provide?
The unit has an IP40 ingress rating suitable for indoor site conditions where solid-object protection is required.
Which standards govern its test routines?
Test sequences are implemented to align with IEC 60364 requirements and the instrument carries recognised approvals such as CE, CSA and UL 61010.
Note
Fluke 1662 replaces the existing Fluke 1651 and Fluke 1652.
Standards
IEC 60364
Supplied with
The Fluke 1662 comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.
Liens connexes
- Fluke 1662 Multifunction Tester 1000V
- Fluke 1663 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1662 SCH FTT KIT Multifunction Tester 10000V With USB
- Fluke SMFT-1000 Multifunction Tester 1000V With Optical USB, Wireless
- Fluke SMFT-1000 Multifunction Tester 1000V Earth Resistance Measurement With Wireless
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, RSCAL