Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB
- N° de stock RS:
- 117-6667
- Numéro d'article Distrelec:
- 300-60-476
- Référence fabricant:
- FLK-1664FC SCH
- Fabricant:
- Fluke
Sous-total (1 unité)*
2 390,00 €
(TVA exclue)
2 891,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 01 juin 2026
- Plus 8 unité(s) expédiée(s) à partir du 01 juin 2026
- Plus 3 unité(s) expédiée(s) à partir du 11 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 390,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 117-6667
- Numéro d'article Distrelec:
- 300-60-476
- Référence fabricant:
- FLK-1664FC SCH
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | Phase to Neutral, Phase to Earth | |
| Automatic RCD Test | Yes | |
| Model Number | 1664FC | |
| RCD Ramp Test | Yes | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 500V ac/dc | |
| Test Type | Multifunction Installation Tester | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 1mA | |
| RCD Test Type | Type S, Type G, AC | |
| Width | 250mm | |
| Standards/Approvals | CSA, UL 61010, ANSI/ISAs82.02.01 2000, CE, EN 610101 Ed 2.0 (200102) | |
| Weight | 1.3kg | |
| Remote Switch Mode | Yes | |
| Height | 125mm | |
| Length | 100mm | |
| IP Rating | IP40 | |
| Test Standards | EN 61557-1, EN 61557-7, EN 61557-10 | |
| Battery Type | AA | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 500, 300V | |
| Display Type | LCD | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 40°C | |
| Power Source | Battery | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type Phase to Neutral, Phase to Earth | ||
Automatic RCD Test Yes | ||
Model Number 1664FC | ||
RCD Ramp Test Yes | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 500V ac/dc | ||
Test Type Multifunction Installation Tester | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 1mA | ||
RCD Test Type Type S, Type G, AC | ||
Width 250mm | ||
Standards/Approvals CSA, UL 61010, ANSI/ISAs82.02.01 2000, CE, EN 610101 Ed 2.0 (200102) | ||
Weight 1.3kg | ||
Remote Switch Mode Yes | ||
Height 125mm | ||
Length 100mm | ||
IP Rating IP40 | ||
Test Standards EN 61557-1, EN 61557-7, EN 61557-10 | ||
Battery Type AA | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 500, 300V | ||
Display Type LCD | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 40°C | ||
Power Source Battery | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1664FC SCH
This multifunction tester is a portable instrument for verifying electrical installations and protective devices across industrial and commercial environments. It combines insulation, continuity, loop impedance and RCD testing with live data transfer to mobile devices, enabling on-site measurement capture and reporting while working to national installation practices.
Features & Benefits
• Insulation test up to 1000V protects connected equipment from damage
• Continuity test current of 1 mA allows safe motor winding checks
• Loop impedance phase to NEUTRAL tester provides Rapid ZI and PSC readings
• RCD ramp test meter Fluke supports VAR mode for EV/DC RCDs
• Earth resistance measurement tester outputs 25V at 128 Hz for RE checks
• Downloadable data USB tester syncs results to smartphone/cloud
• Continuity test current of 1 mA allows safe motor winding checks
• Loop impedance phase to NEUTRAL tester provides Rapid ZI and PSC readings
• RCD ramp test meter Fluke supports VAR mode for EV/DC RCDs
• Earth resistance measurement tester outputs 25V at 128 Hz for RE checks
• Downloadable data USB tester syncs results to smartphone/cloud
**Applications**
• Suitable for commissioning domestic and commercial distribution boards
• Ideal for testing EV charging DC protection and 6 mA monitors
• Used for maintenance diagnostics on motor windings and circuits
• Can be used for field data collection and report generation via cloud
• Used with site acceptance procedures requiring RCD trip and timing checks
• Ideal for testing EV charging DC protection and 6 mA monitors
• Used for maintenance diagnostics on motor windings and circuits
• Can be used for field data collection and report generation via cloud
• Used with site acceptance procedures requiring RCD trip and timing checks
What power source does it use and how many cells are required?
It runs on six AA batteries, enabling field use without mains power.
Which overvoltage categories does it meet for safe measurement environments?
It is rated for CAT III at 500V and CAT IV at 300V for site testing.
How does it handle non‑trip RCD loop tests for Faster readings?
It offers a high‑current loop mode and a Z‑max memory to capture Peak loop values without tripping protective devices.
Can it measure prospective fault current and how is that calculated?
It computes PEFC or PSC by dividing measured mains voltage by loop or line resistance and displays the Value in amps.
What interfaces are available for exporting results and remote control?
It includes a USB Interface for data download and a remote probe/lead for switch‑mode operation.