Honeywell Technologies GLC Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, Die Cast Zinc Epoxy Coated Housing, 240V
- N° de stock RS:
- 217-7135
- Référence fabricant:
- GLCC01C
- Fabricant:
- Honeywell
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
96,80 €
(TVA exclue)
117,13 €
(TVA incluse)
- N° de stock RS:
- 217-7135
- Référence fabricant:
- GLCC01C
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Roller Plunger | |
| IP Rating | IP66 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Die Cast Zinc Epoxy Coated | |
| Contact Type | Snap Action | |
| Switching Current | 6A | |
| Series | GLC | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 240V ac | |
| Switching DC Voltage | 250V dc | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | IEC/EN 60947-5-1, EN50047, EN45545-2 (GLC/GLE), CSA C22.2 14, UL 508, UL, CSA, CE, CCC1 GB14048.5, CCC1 | |
| Hazardous Area Certification | No | |
| Mechanical Life | 10000000Operations | |
| Conduit Entry | 20 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Roller Plunger | ||
IP Rating IP66 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Die Cast Zinc Epoxy Coated | ||
Contact Type Snap Action | ||
Switching Current 6A | ||
Series GLC | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 240V ac | ||
Switching DC Voltage 250V dc | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals IEC/EN 60947-5-1, EN50047, EN45545-2 (GLC/GLE), CSA C22.2 14, UL 508, UL, CSA, CE, CCC1 GB14048.5, CCC1 | ||
Hazardous Area Certification No | ||
Mechanical Life 10000000Operations | ||
Conduit Entry 20 mm | ||
Honeywell GLC Series Limit Switch, 20mm conduit entry, Roller Plunger Actuator - GLCC01C
This limit switch is a Compact electrical actuator designed to detect and signal mechanical position changes in industrial environments. It operates across a wide ambient range and connects via a 20mm conduit entry to integrate with control systems. The enclosure is corrosion‑resistant and rated to withstand ingress of dust and water, making it suitable for demanding production and transport applications.
Features and Benefits:
• Snap‑action contacts deliver Rapid state change and precise signalling
• 1NO/1NC contact set enables versatile circuit wiring options
• 6A switching current supports moderate load control tasks
• 10,000,000 operations mechanical life reduces maintenance frequency
• IP66 rating preserves functionality in dusty and wet conditions
• 1NO/1NC contact set enables versatile circuit wiring options
• 6A switching current supports moderate load control tasks
• 10,000,000 operations mechanical life reduces maintenance frequency
• IP66 rating preserves functionality in dusty and wet conditions
Applications
• Suitable for conveyor end‑of‑travel detection in manufacturing lines
• Used for door position monitoring on rail vehicle interiors
• Ideal for actuator limit sensing in automated machinery
• Can be used for safety interlock feedback in control panels
• Used for door position monitoring on rail vehicle interiors
• Ideal for actuator limit sensing in automated machinery
• Can be used for safety interlock feedback in control panels
What electrical voltages can it switch?
It switches up to 240 V AC for alternating current and up to 250 V DC for direct current.
What environmental temperatures can it tolerate during operation?
It operates between -40 °C and 85 °C without performance degradation.
What is the enclosure construction for durability?
The housing is die‑cast zinc with an epoxy coating to resist mechanical and corrosive wear.
What approvals and standards does it meet?
It conforms to IEC/EN 60947‑5‑1, EN 50047, EN 45545‑2, UL, CSA, CE and CCC standards.
Liens connexes
- Honeywell Technologies GLC Series Plunger Limit Switch IP66 240V ac, 6A
- Honeywell Technologies GLC Series Plunger Limit Switch IP66 240V ac, 6A
- Honeywell Technologies GLC Series Roller Plunger Limit Switch IP66 240V ac, 6A
- Honeywell Technologies GLC Series Roller Plunger Limit Switch IP66 240V ac,
- Honeywell Technologies GLC Series Plunger Limit Switch IP66 600V ac, 10A
- Honeywell Technologies GLC Series Roller Plunger Limit Switch IP66 600V ac,
- Honeywell Technologies GLC Series Rod Limit Switch IP66 240V ac, 6A
- Honeywell Technologies GLC Series Roller Lever Limit Switch IP66 240V ac, 6A