Honeywell Technologies GLC Series Roller Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

N° de stock RS:: 308-1816
Numéro d'article Distrelec:: 136-30-555
Référence fabricant:: GLCB01C
Fabricant:: Honeywell Technologies

Honeywell Technologies GLC Series Roller Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

Sous-total (1 unité)*

122,99 €

(TVA exclue)

148,82 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

4 unité(s) prête(s) à être expédiée(s)
Plus 136 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	122,99 €

*Prix donné à titre indicatif

N° de stock RS:: 308-1816
Numéro d'article Distrelec:: 136-30-555
Référence fabricant:: GLCB01C
Fabricant:: Honeywell Technologies

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell Technologies
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	IP Rating	IP66
	Contact Configuration	1 NC/1 NO
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLC
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Length	68.5mm
	Depth	26.35mm
	Width	30.5mm
	Standards/Approvals	UL, CCC, CE, CSA
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles
	Operating Force	16N

	Sélectionner tout
	Marque Honeywell Technologies
	Actuator Type Roller Plunger
	Product Type Limit Switch
	IP Rating IP66
	Contact Configuration 1 NC/1 NO
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLC
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Length 68.5mm
	Depth 26.35mm
	Width 30.5mm
	Standards/Approvals UL, CCC, CE, CSA
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles
	Operating Force 16N

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLC Series Limit Switch, 6A Switching Current, IP66 - GLCB01C

This limit switch provides a Compact mechanical Interface for position detection and circuit control in industrial systems. It uses a roller plunger actuator to register motion and change contact state, designed for environments where robust switching and environmental protection are required. The device is suited to control and safety tasks within automation, electrical and mechanical assemblies.

Features and Benefits:

• Snap‑action contacts deliver quick state transition and precise signalling
• 1NC/1NO contact arrangement supports dual control circuits
• Rated for 240V AC switching at 6 A enabling mains‑level loads
• Operating force of 16 N gives consistent actuation response
• IP66 enclosure prevents dust ingress and powerful water jets
• Mechanical endurance of 10,000,000 cycles ensures prolonged operational life

Applications

• Suitable for limit detection on conveyor end stops and Gates
• Ideal for actuator position sensing in industrial valves
• Used with motor starters for overtravel protection routines
• Can be used for safety interlocks on access panels
• Used for position feedback in material‑handling equipment

What conduit entry is provided for wiring connections?

A PG13.5 conduit entry is supplied to accept compatible threaded conduit fittings and cable glands.

Which ambient temperatures can it withstand during operation?

It operates reliably between −40 °C and 85 °C, accommodating cold storage to warm machine‑room conditions.

What is the enclosure material and its protective treatment?

The body is metal with an electrostatic epoxy coating applied to provide corrosion resistance and a Durable finish.

Which certification marks indicate recognised approvals?

The unit carries UL, CCC, CE and CSA approvals indicating multiple international safety assessments.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.