Honeywell Technologies GLC Series Rod Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

N° de stock RS:: 308-1844
Numéro d'article Distrelec:: 303-01-509
Référence fabricant:: GLCB01A4J
Fabricant:: Honeywell

Honeywell Technologies GLC Series Rod Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

Sous-total (1 unité)*

133,81 €

(TVA exclue)

161,91 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

36 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 105 unité(s) expédiée(s) à partir du 07 septembre 2026
Plus 105 unité(s) expédiée(s) à partir du 18 janvier 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	133,81 €

*Prix donné à titre indicatif

N° de stock RS:: 308-1844
Numéro d'article Distrelec:: 303-01-509
Référence fabricant:: GLCB01A4J
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Rod
	Product Type	Limit Switch
	Contact Configuration	1 NC/1 NO
	IP Rating	IP66
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLC
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	26.35mm
	Standards/Approvals	UL 508, EN/IEC 60947-5-1, CSA C22.2 No. 14, CE, CCC
	Width	30.5mm
	Length	68.5mm
	Hazardous Area Certification	No
	Operating Force	0.12Nm
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Honeywell
	Actuator Type Rod
	Product Type Limit Switch
	Contact Configuration 1 NC/1 NO
	IP Rating IP66
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLC
	Minimum Operating Temperature -40°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 26.35mm
	Standards/Approvals UL 508, EN/IEC 60947-5-1, CSA C22.2 No. 14, CE, CCC
	Width 30.5mm
	Length 68.5mm
	Hazardous Area Certification No
	Operating Force 0.12Nm
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLC Series Limit Switch, IP66, 6A Switching Current - GLCB01A4J

This limit switch provides a compact, robust switching solution for industrial control and automation tasks. It is designed to detect mechanical movement and deliver reliable electrical switching in demanding environments, offering a sealed housing and snap-action contacts for clear signal transitions.

Features and Benefits:

• Snap-action contacts deliver crisp switching and reduced contact bounce
• 1NC and 1NO arrangement allows flexible circuit configuration
• IP66 ingress protection enables operation in wet and dusty environments
• Operating range from -40°C to 85°C supports harsh temperature conditions
• Rated for 240V AC at 6A to handle common control voltages and loads
• Mechanical life of 10,000,000 cycles ensures extended service intervals

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on industrial actuators and valves
• Used with robotic pick-and-place systems for limit referencing
• Can be used for safety interlocks on access panels and guards

What conduit entry does it use for cable routing?

It accepts a PG13.5 conduit entry to integrate with standard industrial conduit systems.

What material protects the enclosure from corrosion?

The housing is finished with an electrostatic epoxy-coated zinc layer to resist environmental degradation.

How does the actuator operate mechanically?

A rod-type actuator transmits linear motion to the internal snap-action mechanism for quick contact changeover.

Which standards govern its electrical and safety performance?

It meets EN/IEC 60947-5-1 and other listed approvals for industrial switch performance.

Is it suitable for DC switching and what rating applies?

It is specified to switch up to 250V DC under the stated contact ratings.

Approvals

UL; CSA

Standards

EN 50047