Honeywell Technologies GLC Series Roller Plunger Limit Switch, 2 NC, IP66, Die Cast Zinc Epoxy Coated Housing, 600V ac,

N° de stock RS:: 311-2257
Référence fabricant:: GLCC06C
Fabricant:: Honeywell

Honeywell Technologies GLC Series Roller Plunger Limit Switch, 2 NC, IP66, Die Cast Zinc Epoxy Coated Housing, 600V ac,

Sous-total (1 unité)*

134,65 €

(TVA exclue)

162,93 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

26 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	134,65 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2257
Référence fabricant:: GLCC06C
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	Contact Configuration	2 NC
	IP Rating	IP66
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Slow Action
	Switching Current	10A
	Terminal Type	M20
	Series	GLC
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	26.35mm
	Standards/Approvals	CCC, CE, CSA, UL
	Width	30.5mm
	Length	68.5mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Conduit Entry	20 mm
	Operating Force	13N

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Plunger
	Product Type Limit Switch
	Contact Configuration 2 NC
	IP Rating IP66
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Slow Action
	Switching Current 10A
	Terminal Type M20
	Series GLC
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 26.35mm
	Standards/Approvals CCC, CE, CSA, UL
	Width 30.5mm
	Length 68.5mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Conduit Entry 20 mm
	Operating Force 13N

Pays d'origine :: GB

Honeywell GLC Series Limit Switch, Roller Plunger Actuator, 20mm Conduit Entry - GLCC06C

This limit switch provides mechanical position sensing for industrial and automation systems, using a roller plunger actuator to detect motion and trigger control circuits. Constructed with a robust die-cast zinc enclosure and sealed to IP66, it is suitable for demanding environments where ingress protection and repeatable switching are required. The device operates across a wide temperature range and employs slow-action contacts for reliable state changes in electrical control applications.

Features and Benefits:

• Two normally closed contacts for safe circuit interruption
• Slow-action switching for controlled contact transition
• Ten million-cycle mechanical life for prolonged service
• Operates between −40°C and 85°C for a wide temperature range
• 13 N actuation force for predictable trigger response
• M20 conduit entry for secure cable termination

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for door position monitoring on industrial enclosures
• Used for limit sensing on automated assembly machinery
• Can be used for safety interlocks in material handling systems
• Suitable for position feedback in electrical switchgear panels

What electrical ratings define the switch’s load capability?

It can switch up to 10A and is rated for 600V AC and 250V DC, permitting use with common control and power circuits.

How does the enclosure material affect field use?

The die‑cast zinc housing offers mechanical resilience against impacts and supports long-term installation in industrial settings.

What termination provisions are provided for installation?

A 20mm conduit entry and M20 Terminal configuration allow standard conduit glands and secure cable routing.

Which approvals confirm suitability for regulated installations?

The unit carries CCC, CE, CSA and UL approvals, aligning it with multiple regional regulatory requirements.

How Compact is the device for panel or machine mounting?

The switch has a length of 68.5mm, a width of 30.5mm and a depth of 26.35mm to suit confined mounting spaces.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.