Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Screw Terminal, 28 V dc, 277 V ac
- N° de stock RS:
- 842-4757
- Référence fabricant:
- 2TL1-3D
- Fabricant:
- Honeywell
Sous-total (1 unité)*
168,82 €
(TVA exclue)
204,27 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 49 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 100 unité(s) expédiée(s) à partir du 21 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 168,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 842-4757
- Référence fabricant:
- 2TL1-3D
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Contact Configuration | DPDT | |
| Product Type | Toggle Switch | |
| Switch Operation | On-On | |
| Switch Contact Current | 20A | |
| Mount Type | Bushing | |
| Terminal Type | Screw | |
| Panel Cutout Size | 12.4 mm | |
| Actuator Length | 17mm | |
| Minimum Operating Temperature | -65°C | |
| Contact DC Voltage | 28V dc | |
| Contact AC Voltage | 277V ac | |
| Switch Configuration | On-On | |
| Maximum Operating Temperature | 71°C | |
| Series | TL | |
| Height | 26.7mm | |
| Length | 22mm | |
| Standards/Approvals | CSA, CE, UL | |
| Width | 33.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Contact Configuration DPDT | ||
Product Type Toggle Switch | ||
Switch Operation On-On | ||
Switch Contact Current 20A | ||
Mount Type Bushing | ||
Terminal Type Screw | ||
Panel Cutout Size 12.4 mm | ||
Actuator Length 17mm | ||
Minimum Operating Temperature -65°C | ||
Contact DC Voltage 28V dc | ||
Contact AC Voltage 277V ac | ||
Switch Configuration On-On | ||
Maximum Operating Temperature 71°C | ||
Series TL | ||
Height 26.7mm | ||
Length 22mm | ||
Standards/Approvals CSA, CE, UL | ||
Width 33.5mm | ||
- Pays d'origine :
- US
Honeywell Series TL Toggle Switch, 20A Switch Contact Current, DPDT Contact Configuration - 2TL1-3D
This toggle switch provides a manually operated means to change electrical circuits within industrial control panels and equipment. It is intended for bushing-mounted installations and offers a simple two-position On–On arrangement suitable for routing or selecting circuit paths in automation, electrical and mechanical systems.
Features and Benefits:
• DPDT contacts deliver dual-circuit switching for control flexibility
• 20 A contact rating supports substantial load currents
• 277V AC contact capability for high-voltage AC circuits
• 28V DC contact rating for DC control and signalling circuits
• Screw terminals allow robust wire fastening and serviceability
• Withstands −65 to 71 °C for use across wide temperature ranges
• 20 A contact rating supports substantial load currents
• 277V AC contact capability for high-voltage AC circuits
• 28V DC contact rating for DC control and signalling circuits
• Screw terminals allow robust wire fastening and serviceability
• Withstands −65 to 71 °C for use across wide temperature ranges
Applications
• Suitable for selector duties in control panels and switchboards
• Ideal for motor starter changeover and auxiliary circuits
• Used with relay logic in industrial automation cabinets
• Can be used for manual override functions in mechanical systems
• Ideal for motor starter changeover and auxiliary circuits
• Used with relay logic in industrial automation cabinets
• Can be used for manual override functions in mechanical systems
What mounting preparation is required for fitting?
It requires a panel cut-out sized at 12.4mm to accept the bushing mount and secure into the panel.
How does the actuator suit operator access?
The exposed actuator extends 17 mm, providing a positive manual Interface for switching actions.
What contact arrangement is provided for circuit routing?
The unit uses a double-pole double-throw configuration that switches two separate circuits between two positions.
What Terminal style is provided for wiring methods?
Connections are MADE via screw-type terminals that accommodate standard stranded or solid conductors for reliable termination.
Which approvals cover electrical safety and market conformity?
It carries recognised approvals from CSA, CE and UL for use in compliant installations.
Standards
UL recognized, CSA certified, CE approved