Honeywell Toggle Switch, Bushing Mount, On-Off-On, DPDT, Screw Terminal, 277 V ac
- N° de stock RS:
- 842-4766
- Numéro d'article Distrelec:
- 303-45-273
- Référence fabricant:
- 2TL1-5
- Fabricant:
- Honeywell
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
96,97 €
(TVA exclue)
117,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 24 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 96,97 € |
| 10 - 24 | 85,33 € |
| 25 - 49 | 72,73 € |
| 50 + | 68,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 842-4766
- Numéro d'article Distrelec:
- 303-45-273
- Référence fabricant:
- 2TL1-5
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Toggle Switch | |
| Contact Configuration | DPDT | |
| Switch Operation | On-Off-On | |
| Switch Contact Current | 18A | |
| Mount Type | Bushing | |
| Terminal Type | Screw | |
| Panel Cutout Size | 12.4 mm | |
| Actuator Length | 17mm | |
| Minimum Operating Temperature | -65°C | |
| Contact AC Voltage | 277V ac | |
| Maximum Operating Temperature | 71°C | |
| Switch Configuration | DPDT | |
| Standards/Approvals | UL, CSA, CE | |
| Width | 33.5mm | |
| Series | TL | |
| Height | 26.7mm | |
| Length | 22mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Toggle Switch | ||
Contact Configuration DPDT | ||
Switch Operation On-Off-On | ||
Switch Contact Current 18A | ||
Mount Type Bushing | ||
Terminal Type Screw | ||
Panel Cutout Size 12.4 mm | ||
Actuator Length 17mm | ||
Minimum Operating Temperature -65°C | ||
Contact AC Voltage 277V ac | ||
Maximum Operating Temperature 71°C | ||
Switch Configuration DPDT | ||
Standards/Approvals UL, CSA, CE | ||
Width 33.5mm | ||
Series TL | ||
Height 26.7mm | ||
Length 22mm | ||
- Pays d'origine :
- US
Honeywell Series TL Toggle Switch, 18A Switch Contact Current, 277V AC Contact AC Voltage - 2TL1-5
This toggle switch provides manual control of electrical circuits in industrial and commercial installations, offering changeover switching for two independent poles. It is intended for panel installation using a bushing mount and operates in an On‑Off‑On arrangement to select between two outputs or isolate a circuit. The unit is suitable where a mechanical, user-operated selector is required for machinery controls, instrumentation panels or power distribution interfaces.
Features and Benefits:
• DPDT contacts deliver dual-circuit switching with simplified wiring
• 18A rated contact current supports high-load switching
• 277V AC contact rating accommodates higher-voltage circuits
• Screw terminals permit secure, serviceable cable connections
• Operates between -65°C and 71°C for wide thermal ranges
• 18A rated contact current supports high-load switching
• 277V AC contact rating accommodates higher-voltage circuits
• Screw terminals permit secure, serviceable cable connections
• Operates between -65°C and 71°C for wide thermal ranges
Applications
• Suitable for control panels in factory automation systems
• Ideal for manual changeover of motor control circuits
• Used for selection between redundant power feeds in distribution boards
• Can be used for switching instrument signal routes in test rigs
• Ideal for manual changeover of motor control circuits
• Used for selection between redundant power feeds in distribution boards
• Can be used for switching instrument signal routes in test rigs
What mount method is required for panel fitting?
The switch installs via a bushing mount requiring a 12.4mm panel cut-out to secure the bezel and ensure correct alignment.
How is the actuator accessed and operated?
The lever provides a 17mm extension for tactile engagement on control panels and operator stations.
How are electrical connections terminated?
External conductors are fastened to screw-type terminals that allow repeated service and firm electrical contact.
Which approvals cover suitability for industrial installations?
It holds UL, CSA and CE approvals indicating conformity with recognised electrical safety and market standards.
Standards
UL recognized, CSA certified, CE approved
Liens connexes
- Honeywell Toggle Switch On-Off-On Screw Terminal, 277 V ac
- Honeywell Toggle Switch On-Off-On Screw Terminal 277 V ac
- Honeywell Toggle Switch On-On-On Screw Terminal, 277 V ac
- Honeywell Toggle Switch On-On Screw Terminal, 277 V ac
- Honeywell Toggle Switch On-Off Screw Terminal, 277 V ac
- Honeywell Toggle Switch On-Momentary On Screw Terminal, 277 V ac
- Honeywell Toggle Switch On-On Screw Terminal 277 V ac
- Honeywell Toggle Switch On-Off-On Quick Connect Terminal, 277 V ac