TE Connectivity, Analogue Output Humidity Sensor, Through Hole Mount, Analogue, ±2 %RH, 2-Pin
- N° de stock RS:
- 893-7082
- Référence fabricant:
- HPP801A031
- Fabricant:
- TE Connectivity
Offre groupée disponible
Sous-total (1 unité)*
8,77 €
(TVA exclue)
10,61 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 3 restante(s), prêt à être expédié
- Plus 32 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 1 - 24 | 8,77 € |
| 25 - 99 | 8,31 € |
| 100 - 249 | 7,45 € |
| 250 - 499 | 6,58 € |
| 500 + | 5,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 893-7082
- Référence fabricant:
- HPP801A031
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Product Type | Humidity Sensor | |
| Output Type | Analogue | |
| Sub Type | Humidity Sensor | |
| Interface Type | Analogue | |
| Accuracy | ±2 %RH | |
| Mount Type | Through Hole | |
| Pin Count | 2 | |
| Maximum Operating Temperature | 140°C | |
| Minimum Operating Temperature | -60°C | |
| Maximum Supply Voltage | 10V ac | |
| Standards/Approvals | No | |
| Height | 6.2mm | |
| Length | 10.2mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Product Type Humidity Sensor | ||
Output Type Analogue | ||
Sub Type Humidity Sensor | ||
Interface Type Analogue | ||
Accuracy ±2 %RH | ||
Mount Type Through Hole | ||
Pin Count 2 | ||
Maximum Operating Temperature 140°C | ||
Minimum Operating Temperature -60°C | ||
Maximum Supply Voltage 10V ac | ||
Standards/Approvals No | ||
Height 6.2mm | ||
Length 10.2mm | ||
Automotive Standard No | ||
- Pays d'origine :
- FR
TE Connectivity HS1101LF Relative Humidity Sensors
The TE Connectivity MEAS HS1101LF humidity sensors are suitable for frequency output circuity or linear voltage. These humidity sensors require no calibration in standard conditions and are therefore fully interchangeable. Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin Air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.
• Lead free
• High reliability with long-term stability
• Low temperature coefficient
• Fast response time
• Full interchangeability with no calibration required in standard conditions
• Instantaneous desaturation after long periods in saturation phase
• Compatible with automatized assembly processes, including Pb free wave soldering and reflow processes
• Individual marking for compliance to stringent traceability requirements
• Part may be washed with distilled water
Applications
• Automotive
• Cabin Air control
• Meteorology
• Home appliances
• Office automation
• Printers
Temperature & Humidity Sensors, TE Connectivity
Liens connexes
- TE Connectivity Through Hole Mount ±2 %RH, 2-Pin
- RS PRO Plug-in ±3 %RH, 2-Pin
- TE Connectivity Temperature & Humidity Sensor Through Hole Mount ±5%RH
- RS PRO Plug-in ±3 %RH, 2-Pin SIP
- TE Connectivity Voltage Output Humidity Sensor Through Hole Analogue ±5
- TE Connectivity Through Hole Mount ±5 %RH, 3-Pin
- TE Connectivity HTU31V Series Surface Mount ±2 %RH, 6-Pin DFN
- TE Connectivity Temperature & Humidity Sensor Analogue, ±2%