Festo EMMS-ST Series Hybrid Stepper Motor 48V, 0.5Nm Torque, 1.8 °, 5 mm Shaft
- N° de stock RS:
- 181-6679
- Numéro d'article Distrelec:
- 301-68-719
- Référence fabricant:
- EMMS-ST-42-S-SE-G2
- Fabricant:
- Festo
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
254,56 €
(TVA exclue)
308,02 €
(TVA incluse)
- N° de stock RS:
- 181-6679
- Numéro d'article Distrelec:
- 301-68-719
- Référence fabricant:
- EMMS-ST-42-S-SE-G2
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Sub Type | Hybrid | |
| Product Type | Stepper Motor | |
| Step Angle | 1.8° | |
| Holding Torque | 0.5Nm | |
| Voltage | 48V | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.8A | |
| Shaft Length | 24mm | |
| IP Rating | IP54 | |
| Standards/Approvals | IEC 60034 | |
| Resistance Per Phase | 1.75Ω | |
| Depth | 94mm | |
| Output Speed | 1740rpm | |
| Series | EMMS-ST | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Sub Type Hybrid | ||
Product Type Stepper Motor | ||
Step Angle 1.8° | ||
Holding Torque 0.5Nm | ||
Voltage 48V | ||
Shaft Diameter 5mm | ||
Current Rating 1.8A | ||
Shaft Length 24mm | ||
IP Rating IP54 | ||
Standards/Approvals IEC 60034 | ||
Resistance Per Phase 1.75Ω | ||
Depth 94mm | ||
Output Speed 1740rpm | ||
Series EMMS-ST | ||
- Pays d'origine :
- CN
Festo Hybrid Stepper Motor, 48V DC, 1740rpm - EMMS-ST-42-S-SE-G2
Accurately control motor movements with this hybrid stepper motor from Festo. Precise and repeatable stepping ability makes this unit ideal for speed control and positioning applications. It gives you enhanced dexterity and efficiency for your programmed actions and is able to move a fraction of a rotation at a time for applications that need minute accuracy. The motor's 2-phase hybrid technology offers high driving torque for improved power. Thanks to optimised connection technology, the unit is quick and simple to hook up to a controller.
• Shaft is held in position even after the power supply is disconnected for improved reliability
• Needs less energy to reach a given torque for improved power efficiency
• IP54 (ingress protection) rated motor housing and plug connection mean it's protected against dust and water sprays
• Resistant to corrosion for an extended service life
Applications
• Robotics
• Process automation
• Printing and scanning
• Camera platforms
What is a hybrid stepper motor?
A hybrid stepper motor is a type of DC (direct current) motor that combines a high torque-to-size ratio and fast output speed with quiet operation. It's easy to install and allows micro-stepping techniques that increase the fixed number of steps within a motor for smooth and accurate operation.
Liens connexes
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMT-ST Series Stepper Motor Stepper Motor 48V 1.8 °, 6.35 mm Shaft