Festo EMMS-ST Series Hybrid Stepper Motor 48V, 0.5Nm Torque, 1.8 °, 5 mm Shaft
- N° de stock RS:
- 181-6678
- Numéro d'article Distrelec:
- 302-18-145
- Référence fabricant:
- EMMS-ST-42-S-S-G2
- Fabricant:
- Festo
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 181-6678
- Numéro d'article Distrelec:
- 302-18-145
- Référence fabricant:
- EMMS-ST-42-S-S-G2
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 1.8° | |
| Holding Torque | 0.5Nm | |
| Voltage | 48V | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.8A | |
| IP Rating | IP54 | |
| Shaft Length | 24mm | |
| Depth | 66mm | |
| Resistance Per Phase | 1.75Ω | |
| Standards/Approvals | IEC 60034 | |
| Output Speed | 1740rpm | |
| Series | EMMS-ST | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 1.8° | ||
Holding Torque 0.5Nm | ||
Voltage 48V | ||
Shaft Diameter 5mm | ||
Current Rating 1.8A | ||
IP Rating IP54 | ||
Shaft Length 24mm | ||
Depth 66mm | ||
Resistance Per Phase 1.75Ω | ||
Standards/Approvals IEC 60034 | ||
Output Speed 1740rpm | ||
Series EMMS-ST | ||
- Pays d'origine :
- CN
Festo Stepper Motor, Hybrid Technology, Motor Torque 0.5Nm - EMMS-ST-42-S-S-G2
Need a reliable way to precisely control motors in your demanding industrial tasks? Use this stepper motor from Festo. Its hybrid technology makes it suitable for the close management of motorised applications, including half-stepping and micro-stepping. The product’s motor torque of 0.5Nm means you can trust it to start its rotating force promptly without causing the motor to overheat. Effective insulation minimises the spread of heat through the unit. This helps ensure it has a long service life, as heat can lead to the deterioration of a motor over time.
Features & Benefits
• Motor duty type S1, so suitable for driving continuous loads over long periods
• Supports relative humidity of up to 85% for safe use in damp conditions
• IP54 rating indicates limited protection against dust and splashes of water
• Corrosion resistant, so can be used in moist workplaces without suffering damage
Applications
• Textile production
• Printing presses
• CNC machines
• Welding equipment
What kind of temperatures will this unit tolerate?
This hybrid stepper motor works in an ambient temperature range of -10°C to +50°C, so it's safe for use in harsh conditions.
Liens connexes
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMT-ST Series Stepper Motor Stepper Motor 48V 1.8 °, 6.35 mm Shaft