Festo EMMS-ST Series Hybrid Stepper Motor 48V, 0.8Nm Torque, 1.8 °, 6.35 mm Shaft
- N° de stock RS:
- 181-6682
- Numéro d'article Distrelec:
- 302-18-146
- Référence fabricant:
- EMMS-ST-57-S-S-G2
- Fabricant:
- Festo
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 181-6682
- Numéro d'article Distrelec:
- 302-18-146
- Référence fabricant:
- EMMS-ST-57-S-S-G2
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 1.8° | |
| Holding Torque | 0.8Nm | |
| Voltage | 48V | |
| Shaft Diameter | 6.35mm | |
| Current Rating | 5A | |
| IP Rating | IP54 | |
| Shaft Length | 20.6mm | |
| Depth | 73.5mm | |
| Resistance Per Phase | 0.15Ω | |
| Standards/Approvals | CE Certified, cULus Listed | |
| Output Speed | 2720rpm | |
| Series | EMMS-ST | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 1.8° | ||
Holding Torque 0.8Nm | ||
Voltage 48V | ||
Shaft Diameter 6.35mm | ||
Current Rating 5A | ||
IP Rating IP54 | ||
Shaft Length 20.6mm | ||
Depth 73.5mm | ||
Resistance Per Phase 0.15Ω | ||
Standards/Approvals CE Certified, cULus Listed | ||
Output Speed 2720rpm | ||
Series EMMS-ST | ||
- Pays d'origine :
- CN
Festo Stepper Motor, 0.4Nm Brake Holding Torque, IP54 Rating - EMMS-ST-57-S-S-G2
When you need your machinery to make minute movements, go for this stepper motor from Festo. Its hybrid technology means it can handle precise applications as it makes light work of managing half-stepping and micro-stepping motions. Thanks to the device's motor and braking torques (0.8Nm and 0.4Nm respectively), you get prompt starting and stopping of its rotating movement without any risk of overheating. An insulation class B rating means you can rest assured that heat won't spread unchecked through the component. This helps give it a long life as excess temperatures are a driving factor in motor deterioration.
Features & Benefits
• IP54 approval indicates it has limited dust protection and resists splashes of water from all directions
• Operating temperature range of -10°C to +50°C, so is a safe bet for harsh environments
• Tolerates a relative humidity of up to 85% for use in moist atmospheres
• Maximum output speed of 2720rpm makes it compatible with fast-paced applications
Applications
• Motion control positioning systems
• 3D printing
• Image scanners
Can this product drive heavy loads?
Yes, this stepper motor tolerates loads up to 10N on its axial shaft and up to 52N on its radial shaft, so you can rely on it to drive heavy industrial equipment.
Liens connexes
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo For Use With CMMS-ST Motor Controller EMMS-ST-57 Stepper Motor