Festo EMMS-ST Series Hybrid Stepper Motor 48V, 1.4Nm Torque, 1.8 °, 6.35 mm Shaft
- N° de stock RS:
- 181-6687
- Numéro d'article Distrelec:
- 301-68-721
- Référence fabricant:
- EMMS-ST-57-M-SE-G2
- Fabricant:
- Festo
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
279,52 €
(TVA exclue)
338,22 €
(TVA incluse)
- N° de stock RS:
- 181-6687
- Numéro d'article Distrelec:
- 301-68-721
- Référence fabricant:
- EMMS-ST-57-M-SE-G2
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 1.8° | |
| Holding Torque | 1.4Nm | |
| Voltage | 48V | |
| Shaft Diameter | 6.35mm | |
| Current Rating | 5A | |
| Shaft Length | 20.6mm | |
| IP Rating | IP54 | |
| Standards/Approvals | RoHS | |
| Depth | 124mm | |
| Resistance Per Phase | 0.25Ω | |
| Output Speed | 1940rpm | |
| Series | EMMS-ST | |
| Detent Torque | 1400mNm | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 1.8° | ||
Holding Torque 1.4Nm | ||
Voltage 48V | ||
Shaft Diameter 6.35mm | ||
Current Rating 5A | ||
Shaft Length 20.6mm | ||
IP Rating IP54 | ||
Standards/Approvals RoHS | ||
Depth 124mm | ||
Resistance Per Phase 0.25Ω | ||
Output Speed 1940rpm | ||
Series EMMS-ST | ||
Detent Torque 1400mNm | ||
- Pays d'origine :
- CN
Festo Stepper Motor, 52N Maximum Radial Load, IP54 Rating - EMMS-ST-57-M-SE-G2
Need a driving solution that's capable of making tiny movements? Check out this stepper motor from Festo. Thanks to its advanced hybrid technology, it makes light work of half-stepping and micro-stepping motions, so it's just what you need when the job calls for precision. You can trust this is a practical pick for driving heavy industrial equipment, as it has 10N axial and 52N radial load ratings. Quick starts and stops are part of the package too, as it delivers powerful motor and braking torques of 1.4Nm and 1Nm respectively.
Features & Benefits
• Class-B insulation prevents heat from spreading through the motor and damaging sensitive windings
• IP54 approval lets you know it resists most dust and splashes of water from all directions
• Angle tolerance of ±5% means it copes with minor misalignments without suffering loss of performance
Applications
• Industrial automation and control
• Motion control systems
• Printing presses
Is this product corrosion-resistant?
Yes. This stepper motor suffers low stress when in contact with corroding moisture, so you can trust it's a safe bet for humid environments or use near liquids.
Liens connexes
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMT Series Hybrid Stepper Motor 48V 1.8 ° 6.35 mm Shaft

