Unité

sélectionner ou taper la quantité

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Craig & Derricott
	Product Type	Rope Pull Switch
	Contact Configuration	2 NO/2 NC
	Indicator Type	Rope Tension
	Mounting Orientation	Straight
	IP Rating	IP65
	Series	GWD
	E-Stop Button	Yes
	Reset Button	Yes
	Contact AC Voltage	250V ac
	Contact Current	16A
	Contact DC Voltage	24V dc
	Depth	110mm
	Standards/Approvals	ISO, EN
	Width	94mm
	Housing Material	Steel
	Length	285mm
	Hazardous Area Certification	No
	Mechanical Life	1000000Operations
	Conduit Entry	M20

	Sélectionner tout
	Marque Craig & Derricott
	Product Type Rope Pull Switch
	Contact Configuration 2 NO/2 NC
	Indicator Type Rope Tension
	Mounting Orientation Straight
	IP Rating IP65
	Series GWD
	E-Stop Button Yes
	Reset Button Yes
	Contact AC Voltage 250V ac
	Contact Current 16A
	Contact DC Voltage 24V dc
	Depth 110mm
	Standards/Approvals ISO, EN
	Width 94mm
	Housing Material Steel
	Length 285mm
	Hazardous Area Certification No
	Mechanical Life 1000000Operations
	Conduit Entry M20

GWD Series, Double Grab Wire

Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines

Typical applications:- conveyors, assembly lines, transfer lines, packaging machinery, process equipment

Double grabwire switches are a convenient way of installing two rope pull switches on a long rope run, with common wiring and two heads

When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate

If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit

100M max span, each side

Ingress protection to IP65 as standard

Sealed M20 cable entries

Safety and auxiliary contacts as standard 2 N/C + 2 N/O (each side)

To comply with BS 5304 switch units should be fitted at each end of the grabwire

To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements

Please order the appropriate kit for length for your installation from the RS Rope setting kits for grabwire switches

Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304

Note

To comply with safety standards, a switch unit should be fitted at each end of the grab wire to afford system and operator protection.
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757

1 165,75 €

(TVA exclue)

1 165,75 €/unité

Craig & Derricott GWD Rope Pull Switch 285 mm, Straight, 2 NO/2 NC

Frais de livraison offerts pour toute commande de plus de 90,00 €

GWD Series, Double Grab Wire

Note

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.