Craig & Derricott GWN Rope Pull Switch 214.5 mm, Straight, 2 NO/2 NC
- N° de stock RS:
- 198-7380
- Référence fabricant:
- GWN2
- Fabricant:
- Craig & Derricott
Sous-total (1 unité)*
552,28 €
(TVA exclue)
668,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 04 juin 2026
- Plus 3 unité(s) expédiée(s) à partir du 11 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 552,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 198-7380
- Référence fabricant:
- GWN2
- Fabricant:
- Craig & Derricott
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Craig & Derricott | |
| Product Type | Rope Pull Switch | |
| Indicator Type | Rope Tension | |
| Contact Configuration | 2 NO/2 NC | |
| Mounting Orientation | Straight | |
| IP Rating | IP65 | |
| Number of Cable Entries | 3 | |
| Series | GWN | |
| E-Stop Button | Yes | |
| Contact AC Voltage | 415V ac | |
| Reset Button | Yes | |
| Contact DC Voltage | 24V dc | |
| Contact Current | 10A | |
| Width | 100mm | |
| Housing Material | Die Cast Aluminium | |
| Length | 214.5mm | |
| Depth | 99.5mm | |
| Standards/Approvals | EN, ISO | |
| Hazardous Area Certification | No | |
| Conduit Entry | M20 | |
| Mechanical Life | 1000000Operations | |
| Sélectionner tout | ||
|---|---|---|
Marque Craig & Derricott | ||
Product Type Rope Pull Switch | ||
Indicator Type Rope Tension | ||
Contact Configuration 2 NO/2 NC | ||
Mounting Orientation Straight | ||
IP Rating IP65 | ||
Number of Cable Entries 3 | ||
Series GWN | ||
E-Stop Button Yes | ||
Contact AC Voltage 415V ac | ||
Reset Button Yes | ||
Contact DC Voltage 24V dc | ||
Contact Current 10A | ||
Width 100mm | ||
Housing Material Die Cast Aluminium | ||
Length 214.5mm | ||
Depth 99.5mm | ||
Standards/Approvals EN, ISO | ||
Hazardous Area Certification No | ||
Conduit Entry M20 | ||
Mechanical Life 1000000Operations | ||
- Pays d'origine :
- GB
GWN Series, Grab Wire
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304
Note
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757
Stock No typ 239-6757
Liens connexes
- Craig & Derricott GWN Rope Pull Switch 209 mm 2 NO/2 NC
- Craig & Derricott GWN Rope Pull Switch 184 mm 1 NO/2 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC
- Craig & Derricott 2-Pole Isolator Switch -
- Craig & Derricott 2-Pole Isolator Switch -, IP66
- Craig & Derricott
- Craig & Derricott Switch Disconnector 32A
- Craig & Derricott Switch Disconnector 40A