Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- N° de stock RS:
- 130-0875
- Référence fabricant:
- XY2CEDA196H7
- Fabricant:
- Telemecanique Sensors
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 130-0875
- Référence fabricant:
- XY2CEDA196H7
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Contact AC Voltage | 130V ac | |
| E-Stop Button | Yes | |
| Reset Button | Yes | |
| Minimum Operating Temperature | -25°C | |
| Contact DC Voltage | 130V dc | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 70°C | |
| Length | 285mm | |
| Width | 106mm | |
| Housing Material | Stainless Steel | |
| Depth | 142mm | |
| Standards/Approvals | CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | 1/2 in NPT | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Contact AC Voltage 130V ac | ||
E-Stop Button Yes | ||
Reset Button Yes | ||
Minimum Operating Temperature -25°C | ||
Contact DC Voltage 130V dc | ||
Contact Current 3A | ||
Maximum Operating Temperature 70°C | ||
Length 285mm | ||
Width 106mm | ||
Housing Material Stainless Steel | ||
Depth 142mm | ||
Standards/Approvals CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry 1/2 in NPT | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Liens connexes
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors Telemecanique Emergency Stop rope pull Switches XY2C Grab Wire Switch 2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC