Références fabricant

Craig & Derricott GWN Rope Pull Switch 184 mm, Straight, 1 NO/2 NC

N° de stock RS:: 198-7374
Référence fabricant:: GWN1
Fabricant:: Craig & Derricott

Craig & Derricott GWN Rope Pull Switch 184 mm, Straight, 1 NO/2 NC

Sous-total (1 unité)*

386,37 €

(TVA exclue)

467,51 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 12 unité(s) expédiée(s) à partir du 27 avril 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	386,37 €

*Prix donné à titre indicatif

N° de stock RS:: 198-7374
Référence fabricant:: GWN1
Fabricant:: Craig & Derricott

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Craig & Derricott
	Product Type	Rope Pull Switch
	Mounting Orientation	Straight
	Indicator Type	Rope Tension
	Contact Configuration	1 NO/2 NC
	IP Rating	IP65
	Number of Cable Entries	3
	Series	GWN
	Contact Current	10A
	Reset Button	Yes
	Contact AC Voltage	415V ac
	Contact DC Voltage	24V dc
	E-Stop Button	Yes
	Housing Material	Die Cast Aluminium
	Standards/Approvals	EN, ISO
	Length	184mm
	Width	71mm
	Depth	65.5mm
	Hazardous Area Certification	No
	Conduit Entry	M20
	Mechanical Life	1000000Operations

	Sélectionner tout
	Marque Craig & Derricott
	Product Type Rope Pull Switch
	Mounting Orientation Straight
	Indicator Type Rope Tension
	Contact Configuration 1 NO/2 NC
	IP Rating IP65
	Number of Cable Entries 3
	Series GWN
	Contact Current 10A
	Reset Button Yes
	Contact AC Voltage 415V ac
	Contact DC Voltage 24V dc
	E-Stop Button Yes
	Housing Material Die Cast Aluminium
	Standards/Approvals EN, ISO
	Length 184mm
	Width 71mm
	Depth 65.5mm
	Hazardous Area Certification No
	Conduit Entry M20
	Mechanical Life 1000000Operations

Pays d'origine :: GB

Craig & Derricott Grab Wire Switch

The Craig & Derricott GWN series universal single-ended cable switch has 2NC/1NO contact configuration. These switches are a convenient way of installing two-rope pull switches on a long rope of 50m running, with common wiring and two heads. When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate. If this switch is pulled the switch contacts will open, providing operator safety. Whether grab wire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit. It is used for switch protection of personnel working in close proximity to conveyors or rotating and moving machines in various environments. This switch has an electrical contact current rating of 10A at a voltage rating of 415V. This switch has a compact, limit switch-style aluminium alloy die-cast housing and is robustly built with textured powder coat.

Note

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75m lengths.

Features and Benefits

• Switch units should be fitted at each end of the grab wire

• To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements

• The size of conduit entry is M20

Applications

•

Conveyors

• Assembly lines

• Transfer lines

• Packaging machinery

• Process equipment

Certifications

•

BS EN 60947-5-1

• BS EN 60947-5-5

• BS 5304

• IP65 rated