Honeywell Technologies HSCMAND600MG2A3 Pressure SensorBoard 8 SMT

N° de stock RS:: 226-9673
Référence fabricant:: HSCMAND600MG2A3
Fabricant:: Honeywell

Honeywell Technologies HSCMAND600MG2A3 Pressure SensorBoard 8 SMT

Sous-total (1 boîte de 50 unités)*

1 806,40 €

(TVA exclue)

2 185,75 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité	La Boite*
50 +	36,128 €	1 806,40 €

*Prix donné à titre indicatif

N° de stock RS:: 226-9673
Référence fabricant:: HSCMAND600MG2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	200kPa
	Product Type	Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	60 kPa
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Series	HSC
	Width	13.3mm
	Standards/Approvals	ISO 9001
	Height	13.75mm
	Length	10mm
	Minimum Operating Pressure	0mbar
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 200kPa
	Product Type Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 60 kPa
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Series HSC
	Width 13.3mm
	Standards/Approvals ISO 9001
	Height 13.75mm
	Length 10mm
	Minimum Operating Pressure 0mbar
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCMAND600MG2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, 60kPa Maximum Operating Pressure, ±0.25% Accuracy - HSCMAND600MG2A3

This pressure sensor is a piezoresistive board-mount device designed to measure absolute, gauge or differential pressure in non-corrosive, non-ionic gases and, for select ranges, compatible liquids on Port 1. It is supplied as a calibrated, temperature-compensated transducer with ratiometric analogue or 14-bit digital outputs and is intended for Compact PCB integration where high stability and low power consumption are required.

Features and Benefits:

• ±0.25%FSS BFSL accuracy reduces calibration effort
• Operates from a single 3.3V or 5V supply for flexible designs
• Output updated at approximately 1kHz analogue and 2kHz digital
• Compensated over 0°C to 50°C for consistent performance
• Survives up to 200kPa overload for robust system protection
• Low power consumption <10mW enables extended battery use

Applications

• Suitable for medical respiratory monitoring and ventilators
• Used with HVAC transmitters and clogged-filter detection systems
• Ideal for gas-flow instrumentation and chromatography analysers
• Can be used for industrial barometry and flow calibrators
• Suitable for pneumatic control and VAV building systems

What electrical interfaces are available?

The device provides ratiometric analogue output and digital SPI or I2C options with 12-14-bit resolution depending on digital selection.

What environmental temperatures can it tolerate for operation?

It operates from -20°C to 85°C and is characterised for compensated output within 0°C to 50°C.

How are liquids handled by the sensor?

Liquid-media options are available for Port1 only and are limited to pressure ranges ≥60mbar with precautions against particulates and residue.

What package and mounting formats exist?

It is offered in SMT and other board-mount packages, including an 8-pin SMT layout for surface mounting.

How does it maintain long-term measurement stability?

On-board ASIC calibration and compensation minimise drift, reducing the need for frequent system recalibration.