Honeywell Technologies HSCMANV001BA2A3 Pressure SensorBoard 8 SMT

N° de stock RS:: 214-1461
Référence fabricant:: HSCMANV001BA2A3
Fabricant:: Honeywell

Honeywell Technologies HSCMANV001BA2A3 Pressure SensorBoard 8 SMT

Sous-total (1 boîte de 50 unités)*

1 353,25 €

(TVA exclue)

1 637,45 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	27,065 €	1 353,25 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1461
Référence fabricant:: HSCMANV001BA2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	2bar
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	1 bar
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Width	13.3mm
	Standards/Approvals	ISO 9001
	Length	10mm
	Series	HSC
	Minimum Operating Pressure	0mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 2bar
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 1 bar
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Port Type Single Axial Barbed
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Width 13.3mm
	Standards/Approvals ISO 9001
	Length 10mm
	Series HSC
	Minimum Operating Pressure 0mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet-HSCMANV001BA2A3

Honeywell HSC Series Absolute Pressure Sensor, 1 Bar Maximum Operating Pressure, ±0.25% Accuracy - HSCMANV001BA2A3

This absolute pressure sensor measures pressure relative to an internal vacuum reference and provides ratiometric analogue or 14-bit digital output for reading absolute pressure across its specified span and temperature range. It is intended for use with non-corrosive, non-ionic gases and is supplied as a board-mount SMT device with an 8-pin Interface for straightforward PCB integration in industrial and medical systems.

Features and Benefits:

• ±0.25%FSS accuracy reduces software correction requirements
• Operates from a single 3.3V or 5.0V supply for flexible system design
• Calibrated and temperature compensated for 0°C-50°C for stable output
• Low power consumption under 10mW supports battery-powered applications
• Fast update rates approximately 1kHz analogue and 2kHz digital improve response
• Built-in ASIC corrects offset sensitivity and non-linearity for reliable readings

Applications

• Suitable for airflow monitoring in respiratory machines and ventilators
• Used with gas flow instrumentation and chromatography analysers
• Ideal for VAV and HVAC transmitters and clogged filter detection
• Can be used in oxygen concentrators and anaesthesia equipment
• Suitable for medical devices such as spirometers and nebulisers

What media can be applied to the sensor ports?

It is rated for non-corrosive, non-ionic gases, a liquid-media option exists only for Port1 on ranges ≥60 mbar with specific material considerations.

What are the device’s operating and compensated temperature ranges?

Operating range is -20°C to 85°C and compensated range for specified performance is 0°C to 50°C.

How is digital communication implemented?

Digital variants provide SPI or I2C-compatible 14-bit output with minimum 12-bit sensor resolution and standard I2C addresses selectable per configuration.

What mounting and port configuration is provided?

The product is a board-mount SMT package with an 8-pin Interface and a single axial barbed port option for pressure connection.

How does the sensor reduce manufacturing effort for system designers?

On-board calibration and temperature compensation for offset, sensitivity and non-linearity minimise individual sensor testing and decrease production calibration time.