Honeywell Technologies Pressure SensorBoard 8 SMT

N° de stock RS:: 226-9687
Référence fabricant:: HSCMRRN001ND2A3
Fabricant:: Honeywell

Honeywell Technologies Pressure SensorBoard 8 SMT

Sous-total (1 boîte de 50 unités)*

4 391,85 €

(TVA exclue)

5 314,15 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	87,837 €	4 391,85 €

*Prix donné à titre indicatif

N° de stock RS:: 226-9687
Référence fabricant:: HSCMRRN001ND2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	2.64kPa
	Product Type	Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	0.01 kPa
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Length	10mm
	Height	13.75mm
	Standards/Approvals	ISO 9001
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	-1in/H2O
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 2.64kPa
	Product Type Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 0.01 kPa
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Length 10mm
	Height 13.75mm
	Standards/Approvals ISO 9001
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure -1in/H2O
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCMRRN001ND2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCMRRN001ND2A3

This pressure sensor is a Compact board-mounted device that measures absolute, gauge or differential pressures in non‑corrosive gases and selected non‑ionic liquids. It is a piezoresistive device with on‑board signal conditioning providing ratiometric analogue or digital output for Rapid pressure readings across its compensated temperature span. The product is suitable for surface‑mount assembly and accepts dual radial barbed connections for fluid interfacing in demanding systems.

Features and Benefits:

• ±0.25% FSS BFSL accuracy reduces software correction needs
• Calibrated and temperature compensated for 0°C to 50°C operation
• Ratiometric analogue or 14‑bit digital output for direct microprocessor interfacing
• Low power consumption under 10 mW supports battery operation
• Fast response with analogue ∼1 MS and digital ∼0.46 MS update rates
• Dual radial barbed port option simplifies tubing connections

Applications

• Suitable for airflow monitoring and respiratory equipment
• Ideal for HVAC filter clog detection and VAV control
• Used with gas flow instrumentation and chromatography systems
• Can be used for ventilators and oxygen concentrators
• Used for pressure calibration and flow calibrators

What output formats are available?

It provides a ratiometric analogue output and 12-14 bit digital output compatible with I2C or SPI interfaces.

How is temperature influence handled?

Internal calibration and temperature compensation correct offset, sensitivity and non-linearity over the compensated range.

What media can be measured?

It is intended for non-corrosive, non-ionic gases and optionally compatible non-ionic liquids for ranges above 40 mbar.

What protection exists for solder reflow?

The device meets IPC/JEDEC J-STD-020E moisture sensitivity level 1 and tolerates standard reflow profiles.