Honeywell Differential Pressure SensorSurface 8 DIP
- N° de stock RS:
- 211-9924
- Numéro d'article Distrelec:
- 304-58-834
- Référence fabricant:
- HSCDRRN100MDSA3
- Fabricant:
- Honeywell
Sous-total (1 boîte de 50 unités)*
2 018,90 €
(TVA exclue)
2 442,85 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 50 unité(s) expédiée(s) à partir du 02 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | La Boite* |
|---|---|---|
| 50 + | 40,378 € | 2 018,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 211-9924
- Numéro d'article Distrelec:
- 304-58-834
- Référence fabricant:
- HSCDRRN100MDSA3
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Maximum Overload Pressure | 140kPa | |
| Sensor Type | Differential Pressure Sensor | |
| Product Type | Differential Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 10 kPa | |
| Port Type | Dual Radial Barbed | |
| Accuracy | ±0.25 % | |
| Maximum Supply Voltage | 5V | |
| Maximum Operating Temperature | 85°C | |
| Series | HSC | |
| Width | 13.3 mm | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Height | 13.75mm | |
| Minimum Operating Pressure | 100mbar | |
| Automotive Standard | No | |
| Minimum Operating Temperature | -20°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Maximum Overload Pressure 140kPa | ||
Sensor Type Differential Pressure Sensor | ||
Product Type Differential Pressure Sensor | ||
Mount Type Surface | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 10 kPa | ||
Port Type Dual Radial Barbed | ||
Accuracy ±0.25 % | ||
Maximum Supply Voltage 5V | ||
Maximum Operating Temperature 85°C | ||
Series HSC | ||
Width 13.3 mm | ||
Standards/Approvals No | ||
Length 10mm | ||
Height 13.75mm | ||
Minimum Operating Pressure 100mbar | ||
Automotive Standard No | ||
Minimum Operating Temperature -20°C | ||
The Honeywell TruStability High Accuracy Silicon Ceramic (HSC) Series is a piezo resistive silicon pressure sensor offering a ratio metric analogue or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analogue and 2 kHz for digital.
Stability and reliability
Industry-leading accuracy of ±0.25 %FSS BFSL
Port and housing options simplify integration
Wide pressure range, from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2 O to ±150 psi
Small package size
Extremely low power consumption
Liens connexes
- Honeywell Differential Pressure Sensor PCB Mount 140kPa Overload Max, DIP
- Honeywell Differential Pressure Sensor PCB Mount 140kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 140kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 140kPa Overload Max, DIP
- Wurth Elektronik Differential Pressure Sensor Surface Mount 10kPa Overload Max, Surface
- Wurth Elektronik Differential Pressure Sensor Surface Mount 100kPa Overload Max, Surface
- Wurth Elektronik Differential Pressure Sensor Surface Mount 10kPa Overload Max, Surface
- Honeywell Piezoresistive Pressure Sensor Surface Mount 85kPa Overload Max, SMT