Honeywell HSCDRRN010MDAA3 Differential Pressure SensorSurface 8 DIP
- N° de stock RS:
- 211-9923
- Référence fabricant:
- HSCDRRN010MDAA3
- Fabricant:
- Honeywell
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
77,87 €
(TVA exclue)
94,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 58 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 77,87 € |
| 5 - 9 | 75,77 € |
| 10 - 24 | 73,74 € |
| 25 - 39 | 71,87 € |
| 40 + | 70,08 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 211-9923
- Référence fabricant:
- HSCDRRN010MDAA3
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Sensor Type | Differential Pressure Sensor | |
| Product Type | Differential Pressure Sensor | |
| Maximum Overload Pressure | 75kPa | |
| Mount Type | Surface | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 1 kPa | |
| Accuracy | ±0.25 % | |
| Port Type | Dual Radial Barbed | |
| Maximum Supply Voltage | 5V | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Series | HSC | |
| Height | 13.75mm | |
| Length | 10mm | |
| Minimum Operating Pressure | -10mbar | |
| Automotive Standard | No | |
| Minimum Operating Temperature | -20°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Sensor Type Differential Pressure Sensor | ||
Product Type Differential Pressure Sensor | ||
Maximum Overload Pressure 75kPa | ||
Mount Type Surface | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 1 kPa | ||
Accuracy ±0.25 % | ||
Port Type Dual Radial Barbed | ||
Maximum Supply Voltage 5V | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Series HSC | ||
Height 13.75mm | ||
Length 10mm | ||
Minimum Operating Pressure -10mbar | ||
Automotive Standard No | ||
Minimum Operating Temperature -20°C | ||
The Honeywell TruStability High Accuracy Silicon Ceramic (HSC) Series is a piezo resistive silicon pressure sensor offering a ratio metric analogue or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analogue and 2 kHz for digital.
Stability and reliability
Industry-leading accuracy of ±0.25 %FSS BFSL
Port and housing options simplify integration
Wide pressure range, from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2 O to ±150 psi
Small package size
Extremely low power consumption
Liens connexes
- Honeywell Differential Pressure SensorSurface 8 DIP
- Honeywell HSCDRRN100MDSA3 Differential Pressure SensorSurface 8 DIP
- Honeywell Differential Pressure SensorSurface 6 DIP
- Honeywell ABPDRRV015PDSA3 Differential Pressure SensorSurface 6 DIP
- Honeywell Differential Pressure SensorSurface 8 SMT
- NXP Differential Pressure SensorSurface 8 DIP
- Honeywell HSCMRRN060PDSA3 Differential Pressure SensorSurface 8 SMT
- Honeywell SSCMRRD010MD2A3 Differential Pressure SensorSurface 8 SMT