Honeywell Technologies Pressure SensorBoard 8 DIP

N° de stock RS:: 211-9922
Référence fabricant:: HSCDRRN010MDAA3
Fabricant:: Honeywell

Honeywell Technologies Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

3 902,35 €

(TVA exclue)

4 721,85 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	78,047 €	3 902,35 €

*Prix donné à titre indicatif

N° de stock RS:: 211-9922
Référence fabricant:: HSCDRRN010MDAA3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	75kPa
	Product Type	Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	1 kPa
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Width	13.3mm
	Series	HSC
	Standards/Approvals	ISO 9001
	Height	13.75mm
	Length	10mm
	Minimum Operating Pressure	-10mbar
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 75kPa
	Product Type Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 1 kPa
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Width 13.3mm
	Series HSC
	Standards/Approvals ISO 9001
	Height 13.75mm
	Length 10mm
	Minimum Operating Pressure -10mbar
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCDRRN010MDAA3

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRN010MDAA3

This differential pressure sensor measures pressure difference between two ports and provides a ratiometric analogue or 14‑bit digital output for use with low‑voltage systems. It is intended for non‑corrosive, non‑ionic gases and is calibrated and temperature‑compensated for accurate readings across its compensated temperature range. The device is board‑mountable and available with dual radial barbed ports in a DIP package for straightforward PCB integration.

Features and Benefits:

• ±0.25%FSS accuracy reduces software correction needs
• Operates from 3.3V to 5V for low‑voltage designs
• Calibrated and compensated for temperature stability
• Fast update rate supporting up to 2kHz digital output
• High overload protection up to 75kPa improves robustness
• Operates from -20°C to 85°C for industrial conditions

Applications

• Used for ventilator and respiratory flow monitoring
• Suitable for HVAC filter clog detection systems
• Ideal for gas flow instrumentation and calibration rigs
• Used with oxygen concentrators and anaesthesia machines
• Can be used for barometry and indoor Air quality monitoring

What media may be applied to the ports?

The sensor is for non‑corrosive, non‑ionic gases, liquid‑media options exist for Port1 only on selected ranges and require compatible, particulate‑free fluids.

How is the sensor protected during solder assembly?

It meets IPC/JEDEC J‑STD‑020E moisture sensitivity level 1 allowing standard reflow without lengthy pre‑bake when handled per floor‑life guidance.

What digital interfaces are available and what resolution do they provide?

Digital outputs include I²C or SPI‑compatible formats with a minimum 12‑bit sensor resolution and up to 14‑bit digital output.

How does the device behave after power‑up?

Start‑up time to data‑ready is typically 3 MS for digital versions and up to 5 MS for analogue versions.

What mechanical mounting and port arrangements are offered?

The board‑mount package supports DIP pin mounting and variants include dual radial barbed port options for simple tubing connection.