SKF SY 40 FM Pillow Block Bearing -, 40 mm ID
- N° de stock RS:
- 213-2040
- Référence fabricant:
- SY 40 FM
- Fabricant:
- SKF
Sous-total (1 unité)*
88,54 €
(TVA exclue)
107,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 6 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 88,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2040
- Référence fabricant:
- SY 40 FM
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 40mm | |
| Product Type | Pillow Block Bearing | |
| Material | Cast Iron | |
| Static Load Rating | 19kN | |
| Centre Height | 49.2mm | |
| Mount Hole Size | 14 mm | |
| Locking Type | Eccentric Locking Collar | |
| Length | 127mm | |
| Depth | 48mm | |
| Dynamic Load Rating | 30.7kN | |
| End Type | Open | |
| Mount Hole Centre-to-Centre | 146mm | |
| Number of Bolts | 2 | |
| Bore Type | Cylindrical | |
| Height | 99mm | |
| Series | SY | |
| Standards/Approvals | No | |
| Limiting Speed | 4800rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 40mm | ||
Product Type Pillow Block Bearing | ||
Material Cast Iron | ||
Static Load Rating 19kN | ||
Centre Height 49.2mm | ||
Mount Hole Size 14 mm | ||
Locking Type Eccentric Locking Collar | ||
Length 127mm | ||
Depth 48mm | ||
Dynamic Load Rating 30.7kN | ||
End Type Open | ||
Mount Hole Centre-to-Centre 146mm | ||
Number of Bolts 2 | ||
Bore Type Cylindrical | ||
Height 99mm | ||
Series SY | ||
Standards/Approvals No | ||
Limiting Speed 4800rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, 43.2mm Bearing Width, 2 Bolt Holes - SY 40 FM
Get your industrial parts moving with this pillow block bearing from SKF. It has a dynamic load rating of 30.7kN, which means you can use it in heavy-duty applications. As the unit comes with two plain bolt holes, it's easy to mount on a flat support surface. To complete the setup, all you have to do is insert a 40mm-wide shaft through the inner ring. Durable cast iron construction means this is a durable choice that withstands impact and resists corrosion to deliver a long service life in humid areas.
Features & Benefits
• Can be relubricated with grease to help limit wear and friction
• Steel bearing type for durability
• Sealed for protection from contaminants, ensuring your parts keep on spinning
Applications
• Construction equipment
• Packaging technology
• Heat treatment devices
What's the limiting speed of this unit?
This pillow block bearing can reach up to 4,800r/min. So, you can use it in systems where rapid rotation's essential.
What static load rating does this block have?
This sturdy pillow block bearing can take loads of up to 19kN when static.
Liens connexes
- SKF SY 60 FM Pillow Block Bearing -, 60 mm ID
- SKF SY 50 FM Pillow Block Bearing -, 50 mm ID
- SKF SY 25 FM Pillow Block Bearing -, 25 mm ID
- SKF SY 20 FM Pillow Block Bearing -, 20 mm ID
- SKF SY 30 FM Pillow Block Bearing -, 30 mm ID
- SKF SY 40 TR Pillow Block Bearing -, 40 mm ID
- SKF SY 40 LF Pillow Block Bearing -, 40 mm ID
- SKF SY 40 TF/VA228 Pillow Block Bearing -, 40 mm ID