SKF SY 50 FM Pillow Block Bearing -, 50 mm ID
- N° de stock RS:
- 213-2046
- Référence fabricant:
- SY 50 FM
- Fabricant:
- SKF
Sous-total (1 unité)*
107,36 €
(TVA exclue)
129,91 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2046
- Référence fabricant:
- SY 50 FM
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 50mm | |
| Product Type | Pillow Block Bearing | |
| Material | Cast Iron | |
| Static Load Rating | 23.2kN | |
| Centre Height | 57.2mm | |
| Mount Hole Size | 18 mm | |
| Locking Type | Eccentric Locking Collar | |
| Length | 203mm | |
| Depth | 54mm | |
| Dynamic Load Rating | 35.1kN | |
| Mount Hole Centre-to-Centre | 157mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Bore Type | Cylindrical | |
| Height | 114mm | |
| Standards/Approvals | No | |
| Series | SY | |
| Limiting Speed | 4000rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 50mm | ||
Product Type Pillow Block Bearing | ||
Material Cast Iron | ||
Static Load Rating 23.2kN | ||
Centre Height 57.2mm | ||
Mount Hole Size 18 mm | ||
Locking Type Eccentric Locking Collar | ||
Length 203mm | ||
Depth 54mm | ||
Dynamic Load Rating 35.1kN | ||
Mount Hole Centre-to-Centre 157mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Bore Type Cylindrical | ||
Height 114mm | ||
Standards/Approvals No | ||
Series SY | ||
Limiting Speed 4000rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, 50mm ID, 203mm Length - SY 50 FM
To reduce friction in your rotating machinery, opt for this SKF pillow block bearing. It consists of a bearing inside a mounting bracket and supports reliably smooth performance in single-direction machinery. The cast iron housing is resistant to mechanical wear and corrosion, so you can rely on it in demanding conditions. As the unit supports a static load of 23.2kN and a dynamic load of 35.1kN at up to 4000rpm, it's an ideal choice for heavy-duty applications. Mounting it onto a shaft is straightforward, thanks to an eccentric locking collar.
• Sealed on both sides to protect against contamination and stop lubrication leaks
• Cylindrical bore has a high carrying capacity to suit industrial applications
• Bearing steel is highly resistant to wear and suits high-powered systems
• 50mm inside diameter handles heavy loads
Applications
• Packaging equipment
• Agricultural machinery
• Manufacturing plants
• Conveyor units
Are pillow block bearings the same as plummer blocks?
Pillow block bearings and plummer blocks are often used interchangeably, but they are slightly different. Pillow blocks are designed for lighter applications, while plummer blocks suit heavier industrial systems.
What's the recommended diameter for attachment bolts?
You should use 16mm attachment bolts to secure this component to a flat surface.
Liens connexes
- SKF SY 60 FM Pillow Block Bearing -, 60 mm ID
- SKF SY 40 FM Pillow Block Bearing -, 40 mm ID
- SKF SY 25 FM Pillow Block Bearing -, 25 mm ID
- SKF SY 20 FM Pillow Block Bearing -, 20 mm ID
- SKF SY 30 FM Pillow Block Bearing -, 30 mm ID
- SKF SY 60 TR Pillow Block Bearing -, 60 mm ID
- SKF SY 65 TF Pillow Block Bearing -, 65 mm ID
- SKF SY 45 TF Pillow Block Bearing -, 45 mm ID