SKF SY 40 TF/VA228 Pillow Block Bearing -, 40 mm ID
- N° de stock RS:
- 213-2043
- Référence fabricant:
- SY 40 TF/VA228
- Fabricant:
- SKF
Sous-total (1 unité)*
393,46 €
(TVA exclue)
476,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 393,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2043
- Référence fabricant:
- SY 40 TF/VA228
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 40mm | |
| Product Type | Pillow Block Bearing | |
| Material | Steel | |
| Static Load Rating | 19kN | |
| Centre Height | 49.2mm | |
| Locking Type | Set Screw | |
| Mount Hole Size | 14 mm | |
| Length | 175mm | |
| Depth | 48mm | |
| Dynamic Load Rating | 30700kN | |
| Mount Hole Centre-to-Centre | 135.5mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Bore Type | Cylindrical | |
| Height | 99mm | |
| Standards/Approvals | No | |
| Series | SY | |
| Limiting Speed | 150rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 40mm | ||
Product Type Pillow Block Bearing | ||
Material Steel | ||
Static Load Rating 19kN | ||
Centre Height 49.2mm | ||
Locking Type Set Screw | ||
Mount Hole Size 14 mm | ||
Length 175mm | ||
Depth 48mm | ||
Dynamic Load Rating 30700kN | ||
Mount Hole Centre-to-Centre 135.5mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Bore Type Cylindrical | ||
Height 99mm | ||
Standards/Approvals No | ||
Series SY | ||
Limiting Speed 150rpm | ||
- Pays d'origine :
- US
The SKF SY design pillow (Plummer y-bearings) block ball bearing units consist of an insert bearing mounted in a housing which can be bolted to support surface. The insert bearing unit has 40mm inside diameter. It is based on sealed deep groove ball bearings in the 62 and 63 series but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
Can withstand sufficient torque as per the industry standards for mounting purposes
Availability of appropriate seals and end covers
Dimensions are as per the suitable application as prescribed by the manufacturer
Uses Bearing Steel as material
Has a cylindrical type bore
Liens connexes
- SKF SY 20 TF/VA228 Pillow Block Bearing -, 20 mm ID
- SKF SY 40 TF Pillow Block -, 40 mm ID
- SKF SY 60 TF/VA228 Plummer Block House -, 60 mm ID
- SKF SY 50 TF/VA228 Plummer Block House -, 50 mm ID
- SKF SY 25 TF/VA228 Plummer Block House -, 25 mm ID
- SKF SY 30 TF/VA228 Plummer Block House -, 30 mm ID
- SKF SY 45 TF/VA228 Plummer Block House -, 45 mm ID
- SKF SY 35 TF/VA228 Plummer Block House -, 35 mm ID