SKF SY 40 LF Pillow Block Bearing -, 40 mm ID
- N° de stock RS:
- 213-2041
- Référence fabricant:
- SY 40 LF
- Fabricant:
- SKF
Sous-total (1 unité)*
102,30 €
(TVA exclue)
123,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 26 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 102,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2041
- Référence fabricant:
- SY 40 LF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Pillow Block Bearing | |
| Inside Diameter | 40mm | |
| Material | Steel | |
| Static Load Rating | 19kN | |
| Centre Height | 49.2mm | |
| Locking Type | ConCentra | |
| Mount Hole Size | 14 mm | |
| Length | 203mm | |
| Dynamic Load Rating | 30.7kN | |
| Depth | 48mm | |
| Mount Hole Centre-to-Centre | 135.5mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Series | SY | |
| Height | 99mm | |
| Limiting Speed | 4800rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Pillow Block Bearing | ||
Inside Diameter 40mm | ||
Material Steel | ||
Static Load Rating 19kN | ||
Centre Height 49.2mm | ||
Locking Type ConCentra | ||
Mount Hole Size 14 mm | ||
Length 203mm | ||
Dynamic Load Rating 30.7kN | ||
Depth 48mm | ||
Mount Hole Centre-to-Centre 135.5mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Series SY | ||
Height 99mm | ||
Limiting Speed 4800rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, 40mm ID, 49.2mm Centre Height - SY 40 LF
Need an easy way to mount rotating parts in a mechanical power transmission system? Opt for this pillow block bearing unit from SKF. Simply fix it to the support base using the two sturdy bolt holes on either side of the housing and it's ready to go. This robust piece of kit features SKF's ConCentra locking, so getting a tight concentric fit around the shaft is a cinch. As this distributes locking force evenly over the contact surface, it helps reduce vibration and fretting corrosion, keeping your gear in tip-top condition for longer.
Features & Benefits
• Robust cast iron housing material can handle the most demanding industrial environments
• Hefty 30.7kN dynamic load rating is well suited to heavy-duty settings
• Maximum speed of 4800r/min for compatibility with medium-velocity equipment
Applications
• Agricultural machinery
• Construction equipment
• Heat treatment apparatus
How can I make sure the rolling parts stay well-oiled in this unit?
To keep the balls rolling smoothly in this pillow block, regular re-greasing is a must – and thanks to the handy relubrication hole and grease fitting, it couldn't be easier to top up lubrication levels if they're running low.
Liens connexes
- SKF SY 35 LF Pillow Block Bearing -, 35 mm ID
- SKF SY 40 TR Pillow Block Bearing -, 40 mm ID
- SKF SY 40 FM Pillow Block Bearing -, 40 mm ID
- SKF SY 40 TF/VA228 Pillow Block Bearing -, 40 mm ID
- SKF SY 40 TF Pillow Block -, 40 mm ID
- SKF SY 60 TR Pillow Block Bearing -, 60 mm ID
- SKF SY 65 TF Pillow Block Bearing -, 65 mm ID
- SKF SY 60 FM Pillow Block Bearing -, 60 mm ID