Fluke 175 Digital Digital Multimeter True RMS, RSCAL Calibrated
- N° de stock RS:
- 250-725
- Référence fabricant:
- FLUKE 175
- Fabricant:
- Fluke
Sous-total (1 unité)*
442,00 €
(TVA exclue)
534,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 112 restante(s), prêt à être expédié
- Plus 26 unité(s) expédiée(s) à partir du 18 juin 2026
- Plus 78 unité(s) expédiée(s) à partir du 02 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 442,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 250-725
- Référence fabricant:
- FLUKE 175
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Multimeter Type | Digital | |
| Product Type | Multimeter | |
| Resistance Resolution | 100mΩ | |
| Model Number | 175 | |
| Display Type | Digital | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | |
| Maximum Resistance Measurement | 50mΩ | |
| Maximum DC Voltage Measurement | 1kV dc | |
| True RMS | Yes | |
| AC Current Accuracy | ±1.5 % rdg + 3 Digits | |
| DC Current Accuracy | ±1 % rdg + 3 Digits | |
| DC Voltage Accuracy | ±0.15 % rdg + 2 Digits | |
| AC Voltage Accuracy | ±1 % rdg + 3 Digits | |
| AC Voltage Resolution | 0.1mV ac | |
| DC Voltage Resolution | 0.1 mV dc | |
| DC Current Resolution | 0.01mA dc | |
| AC Current Resolution | 0.01mA ac | |
| Maximum Frequency | 1kHz | |
| Resistance Measurement Accuracy | ±1.5 % rdg + 3 Digits | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 50°C | |
| Battery Life | 200h | |
| Standards/Approvals | No | |
| Width | 90mm | |
| Height | 43mm | |
| Weight | 420g | |
| Length | 185mm | |
| Safety Category Level | CAT III, CAT IV | |
| Battery Type | Alkaline | |
| Calibrated | RSCAL | |
| Safety Category Voltage | 1000V | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Multimeter Type Digital | ||
Product Type Multimeter | ||
Resistance Resolution 100mΩ | ||
Model Number 175 | ||
Display Type Digital | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | ||
Maximum Resistance Measurement 50mΩ | ||
Maximum DC Voltage Measurement 1kV dc | ||
True RMS Yes | ||
AC Current Accuracy ±1.5 % rdg + 3 Digits | ||
DC Current Accuracy ±1 % rdg + 3 Digits | ||
DC Voltage Accuracy ±0.15 % rdg + 2 Digits | ||
AC Voltage Accuracy ±1 % rdg + 3 Digits | ||
AC Voltage Resolution 0.1mV ac | ||
DC Voltage Resolution 0.1 mV dc | ||
DC Current Resolution 0.01mA dc | ||
AC Current Resolution 0.01mA ac | ||
Maximum Frequency 1kHz | ||
Resistance Measurement Accuracy ±1.5 % rdg + 3 Digits | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 50°C | ||
Battery Life 200h | ||
Standards/Approvals No | ||
Width 90mm | ||
Height 43mm | ||
Weight 420g | ||
Length 185mm | ||
Safety Category Level CAT III, CAT IV | ||
Battery Type Alkaline | ||
Calibrated RSCAL | ||
Safety Category Voltage 1000V | ||
Statut RoHS : Exempté
- Pays d'origine :
- CZ
Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175
This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.
Features & Benefits
• True-RMS measurement gives accurate readings on non-sinusoidal signals
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
**Applications**
• Suitable for commissioning and fault-finding on motor drives
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
What probes and accessories are supplied for general use?
Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed
temperature measurements use the included bead thermocouple probe.
How does the instrument behave with rapidly changing signals?
An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.
How does it alert when encountering potentially hazardous voltages?
A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.
What recording and hold functions assist data capture during inspections?
The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.
How is battery and fuse maintenance performed on site?
The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.
Supplied with
Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
Liens connexes
- Fluke 175 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 175 Digital Digital Multimeter True RMS
- Fluke 177 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 179 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 83 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 27 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 28 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 287 Digital Digital Multimeter True RMS, RSCAL Calibrated