Fluke 175 Digital Digital Multimeter True RMS, 10 A, 10 A, 1000 V, UKAS Calibrated
- N° de stock RS:
- 394-8826
- Numéro d'article Distrelec:
- 176-05-827
- Référence fabricant:
- FLUKE 175
- Fabricant:
- Fluke
Sous-total (1 unité)*
461,00 €
(TVA exclue)
557,81 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- Plus 299 unité(s) expédiée(s) à partir du 14 septembre 2026
- Plus 63 unité(s) expédiée(s) à partir du 08 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 461,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 394-8826
- Numéro d'article Distrelec:
- 176-05-827
- Référence fabricant:
- FLUKE 175
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Digital Multimeter | |
| Multimeter Type | Digital | |
| Resistance Resolution | 100mΩ | |
| Display Type | Digital | |
| Model Number | 175 | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | |
| Maximum Resistance Measurement | 0.05GΩ | |
| Maximum AC Current Measurement | 10A | |
| Maximum DC Current Measurement | 10A | |
| Maximum DC Voltage Measurement | 1kV dc | |
| Maximum AC Voltage Measurement | 1000V | |
| True RMS | Yes | |
| DC Voltage Accuracy | ±0.15 % rdg + 2 Digits | |
| DC Current Accuracy | ±1 % rdg + 3 Digits | |
| AC Voltage Accuracy | ±1 % rdg + 3 Digits | |
| AC Current Accuracy | ±1.5 % rdg + 3 Digits | |
| AC Voltage Resolution | 0.1mV ac | |
| DC Voltage Resolution | 0.1 mV dc | |
| AC Current Resolution | 10μA ac | |
| DC Current Resolution | 0.01mA dc | |
| Maximum Frequency | 1kHz | |
| Power Source | Battery | |
| Resistance Measurement Accuracy | 0.9% + 1 | |
| Minimum Operating Temperature | -10°C | |
| Battery Life | 200h | |
| Maximum Operating Temperature | 50°C | |
| Weight | 420g | |
| Standards/Approvals | No | |
| Width | 90mm | |
| Length | 185mm | |
| Height | 43mm | |
| Safety Category Level | CAT III, CAT IV | |
| Calibrated | UKAS | |
| Battery Type | Alkaline | |
| Safety Category Voltage | 1000V | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Digital Multimeter | ||
Multimeter Type Digital | ||
Resistance Resolution 100mΩ | ||
Display Type Digital | ||
Model Number 175 | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | ||
Maximum Resistance Measurement 0.05GΩ | ||
Maximum AC Current Measurement 10A | ||
Maximum DC Current Measurement 10A | ||
Maximum DC Voltage Measurement 1kV dc | ||
Maximum AC Voltage Measurement 1000V | ||
True RMS Yes | ||
DC Voltage Accuracy ±0.15 % rdg + 2 Digits | ||
DC Current Accuracy ±1 % rdg + 3 Digits | ||
AC Voltage Accuracy ±1 % rdg + 3 Digits | ||
AC Current Accuracy ±1.5 % rdg + 3 Digits | ||
AC Voltage Resolution 0.1mV ac | ||
DC Voltage Resolution 0.1 mV dc | ||
AC Current Resolution 10μA ac | ||
DC Current Resolution 0.01mA dc | ||
Maximum Frequency 1kHz | ||
Power Source Battery | ||
Resistance Measurement Accuracy 0.9% + 1 | ||
Minimum Operating Temperature -10°C | ||
Battery Life 200h | ||
Maximum Operating Temperature 50°C | ||
Weight 420g | ||
Standards/Approvals No | ||
Width 90mm | ||
Length 185mm | ||
Height 43mm | ||
Safety Category Level CAT III, CAT IV | ||
Calibrated UKAS | ||
Battery Type Alkaline | ||
Safety Category Voltage 1000V | ||
Statut RoHS : Exempté
- Pays d'origine :
- CZ
Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175
This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.
Features & Benefits
• True-RMS measurement gives accurate readings on non-sinusoidal signals
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
**Applications**
• Suitable for commissioning and fault-finding on motor drives
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
What probes and accessories are supplied for general use?
Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed
temperature measurements use the included bead thermocouple probe.
How does the instrument behave with rapidly changing signals?
An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.
How does it alert when encountering potentially hazardous voltages?
A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.
What recording and hold functions assist data capture during inspections?
The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.
How is battery and fuse maintenance performed on site?
The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.
Supplied with
Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
Liens connexes
- Fluke 175 Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 177 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 179 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 83 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 289 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 287 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 115 Digital Multimeter True RMS, UKAS Calibrated
- Fluke 114 Digital Multimeter True RMS, UKAS Calibrated