Fluke 83 Digital Digital Multimeter True RMS, RSCAL Calibrated
- N° de stock RS:
- 481-8164
- Référence fabricant:
- FLUKE 83V
- Fabricant:
- Fluke
Sous-total (1 unité)*
673,00 €
(TVA exclue)
814,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 673,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 481-8164
- Référence fabricant:
- FLUKE 83V
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Multimeter Type | Digital | |
| Product Type | Multimeter | |
| Model Number | 83 | |
| Display Type | Digital | |
| Resistance Resolution | 100mΩ | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance, Temperature | |
| Maximum DC Voltage Measurement | 1kV dc | |
| True RMS | Yes | |
| AC Current Accuracy | ±1.2 % rdg + 2 Digits | |
| DC Current Accuracy | ±0.4 % rdg + 2 Digits | |
| AC Voltage Accuracy | ± 0.5 % + 2 | |
| DC Voltage Accuracy | ±0.1 % rdg + 1 Digits | |
| AC Voltage Resolution | 0.1mV ac | |
| DC Current Resolution | 0.1μA dc | |
| AC Current Resolution | 0.1μA ac | |
| DC Voltage Resolution | 0.1 mV dc | |
| Maximum Frequency | 20kHz | |
| Minimum Operating Temperature | -20°C | |
| Resistance Measurement Accuracy | ±1 % rdg + 3 Digits | |
| Battery Life | 400h | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | No | |
| Length | 186mm | |
| Height | 31mm | |
| Width | 86mm | |
| Weight | 355g | |
| Safety Category Level | CAT III, CAT IV | |
| Battery Type | Alkaline | |
| Calibrated | RSCAL | |
| Safety Category Voltage | 1000V | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Multimeter Type Digital | ||
Product Type Multimeter | ||
Model Number 83 | ||
Display Type Digital | ||
Resistance Resolution 100mΩ | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance, Temperature | ||
Maximum DC Voltage Measurement 1kV dc | ||
True RMS Yes | ||
AC Current Accuracy ±1.2 % rdg + 2 Digits | ||
DC Current Accuracy ±0.4 % rdg + 2 Digits | ||
AC Voltage Accuracy ± 0.5 % + 2 | ||
DC Voltage Accuracy ±0.1 % rdg + 1 Digits | ||
AC Voltage Resolution 0.1mV ac | ||
DC Current Resolution 0.1μA dc | ||
AC Current Resolution 0.1μA ac | ||
DC Voltage Resolution 0.1 mV dc | ||
Maximum Frequency 20kHz | ||
Minimum Operating Temperature -20°C | ||
Resistance Measurement Accuracy ±1 % rdg + 3 Digits | ||
Battery Life 400h | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals No | ||
Length 186mm | ||
Height 31mm | ||
Width 86mm | ||
Weight 355g | ||
Safety Category Level CAT III, CAT IV | ||
Battery Type Alkaline | ||
Calibrated RSCAL | ||
Safety Category Voltage 1000V | ||
- Pays d'origine :
- US
Fluke Multimeter, 400h Battery Life, True RMS Capability - FLUKE 83V
This multimeter is a handheld diagnostic instrument designed for professionals working in automation, electronics, electrical and mechanical environments. It measures AC and DC voltages and currents, resistance, continuity, capacitance, frequency and temperature, delivering measurements appropriate for field and workshop tasks while operating across typical industrial temperature and altitude ranges.
Features & Benefits
• True RMS measurement for accurate non‑sinusoidal readings improves waveform assessment
• DC voltage accuracy ±0.1%rdg+1 digit for precise low‑level sensing
• AC current accuracy ±1.2%rdg+2 digits for reliable alternating current checks
• Frequency response up to 20kHz for high‑frequency signal diagnostics
• Temperature and capacitance functions extend troubleshooting to thermal and component testing
• Battery life 400h with alkaline cells reduces service disruptions
• DC voltage accuracy ±0.1%rdg+1 digit for precise low‑level sensing
• AC current accuracy ±1.2%rdg+2 digits for reliable alternating current checks
• Frequency response up to 20kHz for high‑frequency signal diagnostics
• Temperature and capacitance functions extend troubleshooting to thermal and component testing
• Battery life 400h with alkaline cells reduces service disruptions
**Applications**
• Suitable for verifying motor drive outputs and inverter signals in automation systems
• Ideal for calibrating sensors and measuring low DC voltages in electronics labs
• Used for on‑site current checks and branch circuit verification in electrical maintenance
• Can be used for capacitor testing and component fault finding in mechanical control panels
• Used with temperature probes to troubleshoot thermal issues in assemblies
• Ideal for calibrating sensors and measuring low DC voltages in electronics labs
• Used for on‑site current checks and branch circuit verification in electrical maintenance
• Can be used for capacitor testing and component fault finding in mechanical control panels
• Used with temperature probes to troubleshoot thermal issues in assemblies
What display resolution and update behaviour can I expect for fast events?
The instrument provides a digital count of 6000 with updates around 4 times per second and an analogue 33‑segment bar updating at 40 times per second to help track transient changes.
How does the meter handle input protection and extreme inputs?
The input circuitry is protected for up to 1000V between terminals and earth, with fast fuses on current ranges to limit damage from overloads.
What environmental limits affect operation and storage?
It operates from −20°C to +55°C and is specified for use up to 2000m altitude, with storage capability from −40°C to +60°C.
How does the unit perform when measuring low currents and small conductance?
Microcurrent ranges include 600 μA and 6000 μA sensitivities with specific burden voltages and conductance resolution down to 0.01 nS for fine measurements.
Note
For Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %
Supplied with
TL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guide
Liens connexes
- Fluke 83 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 83 Digital Digital Multimeter True RMS
- Fluke 175 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 179 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 177 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 27 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 28 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 287 Digital Digital Multimeter True RMS, RSCAL Calibrated