Gossen Metrawatt PROFiTEST MF TECH Starter-Set Multifunction Tester Set 600V Earth Resistance Measurement With USB
- N° de stock RS:
- 266-2729
- Numéro d'article Distrelec:
- 303-73-733
- Référence fabricant:
- M537A
- Fabricant:
- Gossen Metrawatt
Sous-total (1 unité)*
3 180,49 €
(TVA exclue)
3 848,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3 180,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 266-2729
- Numéro d'article Distrelec:
- 303-73-733
- Référence fabricant:
- M537A
- Fabricant:
- Gossen Metrawatt
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gossen Metrawatt | |
| Product Type | Multifunction Tester Set | |
| Loop Impedance Test Type | 4 Wire | |
| Automatic RCD Test | No | |
| Model Number | PROFiTEST MF TECH Starter-Set | |
| RCD Ramp Test | No | |
| Non-Tripping | Yes | |
| Insulation Test Voltage | 600V | |
| Maximum Voltage Measurement | 230V | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | No | |
| Interface Type | USB | |
| Continuity Test Current | 1.6mA | |
| RCD Test Type | Type A | |
| Height | 90mm | |
| Width | 260mm | |
| Standards/Approvals | EN 501101, RoHS, IEC 603646 | |
| Weight | 2.7kg | |
| Length | 330mm | |
| Remote Switch Mode | No | |
| IP Rating | IP40 | |
| Test Standards | EN 61010, DIN VDE 0100-600 | |
| Safety Category Level | CAT III, CAT IV | |
| Display Type | LCD | |
| Battery Type | Rechargeable | |
| Maximum Operating Temperature | 40°C | |
| Minimum Operating Temperature | 0°C | |
| Power Source | Battery | |
| Sélectionner tout | ||
|---|---|---|
Marque Gossen Metrawatt | ||
Product Type Multifunction Tester Set | ||
Loop Impedance Test Type 4 Wire | ||
Automatic RCD Test No | ||
Model Number PROFiTEST MF TECH Starter-Set | ||
RCD Ramp Test No | ||
Non-Tripping Yes | ||
Insulation Test Voltage 600V | ||
Maximum Voltage Measurement 230V | ||
Earth Resistance Measurement Yes | ||
Downloadable Data No | ||
Interface Type USB | ||
Continuity Test Current 1.6mA | ||
RCD Test Type Type A | ||
Height 90mm | ||
Width 260mm | ||
Standards/Approvals EN 501101, RoHS, IEC 603646 | ||
Weight 2.7kg | ||
Length 330mm | ||
Remote Switch Mode No | ||
IP Rating IP40 | ||
Test Standards EN 61010, DIN VDE 0100-600 | ||
Safety Category Level CAT III, CAT IV | ||
Display Type LCD | ||
Battery Type Rechargeable | ||
Maximum Operating Temperature 40°C | ||
Minimum Operating Temperature 0°C | ||
Power Source Battery | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Gossen-Metrawatt Multifunction Tester Set, 230V Maximum Voltage Measurement, 600V Insulation Test Voltage - M537A
This multifunction tester set is a portable instrument designed for on-site verification of electrical safety and protective devices. It operates from an internal rechargeable battery and provides measurements required for checking insulation, loop impedance and earth resistance in live 230V systems. The unit features an LCD readout, USB Interface for data transfer and a protective enclosure rated to IP40 for typical indoor fieldwork.
Features and Benefits:
• *Made in Germany - including DAkkS calibration certificate
• 4-wire loop impedance test delivers precise loop readings
• 600V insulation test voltage enables high-voltage dielectric checks
• 1.6mA continuity test current ensures Detectable conductor continuity
• Type A RCD testing performed without tripping behaviour
• 4-wire loop impedance test delivers precise loop readings
• 600V insulation test voltage enables high-voltage dielectric checks
• 1.6mA continuity test current ensures Detectable conductor continuity
• Type A RCD testing performed without tripping behaviour
Applications
• Suitable for periodic installation testing to EN 61010 standards
• Ideal for loop and RCD testing starter kit requirements
• Used for earth resistance measurement on distribution boards
• Can be used with portable setups requiring USB Interface
• Suitable for site testing within 0°C to 40°C ambient range
• Ideal for loop and RCD testing starter kit requirements
• Used for earth resistance measurement on distribution boards
• Can be used with portable setups requiring USB Interface
• Suitable for site testing within 0°C to 40°C ambient range
What safety voltage category does the instrument meet?
It is rated for CAT III and CAT IV environments with 300V safety-category voltage.
How is the instrument powered for field use?
It runs from an internal rechargeable battery and functions independently of the mains during testing.
Which standards and approvals support its measurement capability?
The unit is compliant with EN 61010 and DIN VDE 0100-600 and carries additional approvals including RoHS and IEC 60364-6.
Does the tester Record or export measured data?
It does not offer downloadable data storage but includes a USB Interface for connected workflows.
Liens connexes
- Gossen Metrawatt PROFiTEST MF TECH EVSE-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF TECH 0105-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF TECH Meister-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF TECH Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA Starter-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA Meister-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA Profi-Set Multifunction Tester 600V Earth Resistance Measurement With USB
- Gossen Metrawatt PROFiTEST MF XTRA 0105-Set Multifunction Tester 600V Earth Resistance Measurement With USB