Gossen Metrawatt PROFiTEST MF XTRA Profi-Set Multifunction Tester 600V Earth Resistance Measurement With USB

N° de stock RS:: 266-2736
Numéro d'article Distrelec:: 303-73-740
Référence fabricant:: M537M
Fabricant:: Gossen Metrawatt

Gossen Metrawatt PROFiTEST MF XTRA Profi-Set Multifunction Tester 600V Earth Resistance Measurement With USB

Sous-total (1 unité)*

5 439,86 €

(TVA exclue)

6 582,23 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

2 unité(s) prête(s) à être expédiée(s)
Plus 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	5 439,86 €

*Prix donné à titre indicatif

N° de stock RS:: 266-2736
Numéro d'article Distrelec:: 303-73-740
Référence fabricant:: M537M
Fabricant:: Gossen Metrawatt

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Gossen Metrawatt
	Loop Impedance Test Type	4 Wire
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	RCD Ramp Test	No
	Model Number	PROFiTEST MF XTRA Profi-Set
	Non-Tripping	Yes
	Insulation Test Voltage	600V
	Maximum Voltage Measurement	230V
	Earth Resistance Measurement	Yes
	Downloadable Data	No
	Interface Type	USB
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Height	90mm
	Width	260mm
	Remote Switch Mode	No
	Standards/Approvals	RoHS, IEC 603646, EN 501101
	Weight	2.7kg
	Length	330mm
	IP Rating	IP40
	Test Standards	EN 61010, DIN VDE 0100-600
	Battery Type	Rechargeable
	Display Type	LCD
	Safety Category Level	CAT IV, CAT III
	Power Source	Battery
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	40°C

	Sélectionner tout
	Marque Gossen Metrawatt
	Loop Impedance Test Type 4 Wire
	Product Type Multifunction Tester
	Automatic RCD Test No
	RCD Ramp Test No
	Model Number PROFiTEST MF XTRA Profi-Set
	Non-Tripping Yes
	Insulation Test Voltage 600V
	Maximum Voltage Measurement 230V
	Earth Resistance Measurement Yes
	Downloadable Data No
	Interface Type USB
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Height 90mm
	Width 260mm
	Remote Switch Mode No
	Standards/Approvals RoHS, IEC 603646, EN 501101
	Weight 2.7kg
	Length 330mm
	IP Rating IP40
	Test Standards EN 61010, DIN VDE 0100-600
	Battery Type Rechargeable
	Display Type LCD
	Safety Category Level CAT IV, CAT III
	Power Source Battery
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 40°C

Datasheet - Profitest MF Series

Statut RoHS : Exempté

Pays d'origine :: DE

Gossen-Metrawatt Multifunction Tester, 600V Insulation Test Voltage, 230V Maximum Voltage Measurement - M537M

This multifunction tester is a battery-powered instrument designed for on-site verification of electrical installations and protective devices. It supports a wide range of diagnostic tasks including insulation and earth checks while operating within ambient temperatures from 0°C to 40°C. The instrument meets recognised test standards and carries calibration documentation for traceable measurements, making it suitable for use where portable electrical installation testers are required.

Features and Benefits:

• *Made in Germany - including DAkkS calibration certificate
• 600 V insulation test voltage provides high-voltage resistance assessment
• 1.6 mA continuity current enables accurate non-tripping conductor checks
• 4-wire loop impedance testing ensures precise earth-fault loop readings
• Type A RCD testing allows assessment of AC and pulsating DC protection
• USB Interface facilitates transfer of recorded measurement parameters

Applications

• Suitable for fault finding in TN and TT systems
• Useful for verification during electrical installation testing regimes
• Used for earth resistance measurement tasks on site
• Appropriate for portable electrical installation tester duties in workshops
• Applicable where DAkkS calibration evidence is required

What power source does it use?

It is powered by a rechargeable battery to allow field operation without mains supply.

Which safety categories and voltage limits apply?

The instrument is rated to CAT IV and CAT III use with a safety category voltage of 300 V.

Does it provide automatic RCD sequencing?

No, automatic RCD testing is not available

tests are performed manually.

What environmental protection does the casing offer?

The enclosure has an IP40 rating, providing protection against solid objects larger than 1 mm.

Are test standards and approvals provided with the unit?

It complies with EN 61010 and DIN VDE 0100-600 and includes DAkkS calibration documentation.