Fluke 1664FC Multifunction Tester 1kV Earth Resistance Measurement With USB

N° de stock RS:: 117-6682
Numéro d'article Distrelec:: 300-60-474
Référence fabricant:: FLK-1664FC ITDK
Fabricant:: Fluke

Fluke 1664FC Multifunction Tester 1kV Earth Resistance Measurement With USB

Sous-total (1 unité)*

2 459,00 €

(TVA exclue)

2 975,39 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 6 unité(s) expédiée(s) à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	2 459,00 €

*Prix donné à titre indicatif

N° de stock RS:: 117-6682
Numéro d'article Distrelec:: 300-60-474
Référence fabricant:: FLK-1664FC ITDK
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Loop Impedance Test Type	Phase to Neutral, Phase to Earth
	Product Type	Multifunction Tester
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number	1664FC
	Non-Tripping	No
	Insulation Test Voltage	1kV
	Maximum Voltage Measurement	500V ac/dc
	Test Type	Phase Sequence Test, MOSFET, Resistance, Insulation Resistance, RCD Test, Miniature GPS, Continuity, Wiring Polarity, Frequency, Voltage
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	USB
	Continuity Test Current	1mA
	RCD Test Type	Type S, Type G, AC
	Standards/Approvals	EN/IEC 610102034, CSA, EN/IEC 610101, CE
	Weight	1.3kg
	Remote Switch Mode	Yes
	Height	125mm
	Length	100mm
	Width	250mm
	Test Standards	EN, IEC 61010-1, IEC 61010-2-034
	IP Rating	IP40
	Minimum Continuity Resistance	20Ω
	Safety Category Level	CAT IV, CAT III
	Safety Category Voltage	300V, 500V
	Power Source	Battery
	Display Type	LCD
	Battery Type	AA
	Maximum Continuity Resistance	2kΩ

	Sélectionner tout
	Marque Fluke
	Loop Impedance Test Type Phase to Neutral, Phase to Earth
	Product Type Multifunction Tester
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number 1664FC
	Non-Tripping No
	Insulation Test Voltage 1kV
	Maximum Voltage Measurement 500V ac/dc
	Test Type Phase Sequence Test, MOSFET, Resistance, Insulation Resistance, RCD Test, Miniature GPS, Continuity, Wiring Polarity, Frequency, Voltage
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type USB
	Continuity Test Current 1mA
	RCD Test Type Type S, Type G, AC
	Standards/Approvals EN/IEC 610102034, CSA, EN/IEC 610101, CE
	Weight 1.3kg
	Remote Switch Mode Yes
	Height 125mm
	Length 100mm
	Width 250mm
	Test Standards EN, IEC 61010-1, IEC 61010-2-034
	IP Rating IP40
	Minimum Continuity Resistance 20Ω
	Safety Category Level CAT IV, CAT III
	Safety Category Voltage 300V, 500V
	Power Source Battery
	Display Type LCD
	Battery Type AA
	Maximum Continuity Resistance 2kΩ

Statut RoHS : Exempté

Pays d'origine :: GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1664FC ITDK

This multifunction tester is a handheld electrical instrument designed to perform a broad range of installation and diagnostic assessments for electricians and maintenance engineers. It measures voltage, frequency and phase relationships, conducts insulation and continuity checks, evaluates loop impedance and earth resistance, and runs RCD tests including automatic and ramp procedures. The instrument is battery‑powered and includes a USB Interface for data transfer.

Features and Benefits:

• 500V maximum measurement for comprehensive voltage checks
• 1000V insulation test voltage for high‑voltage resistance assessment
• Continuity test at 1mA for sensitive conductor verification
• 2kΩ maximum continuity range for higher‑resistance circuits
• Automatic RCD test with ramp capability for efficient fault characterisation
• USB downloadable data to Streamline record‑keeping

Applications

• Suitable for verifying wiring polarity and phase sequence on installations
• Ideal for measuring loop impedance phase to earth and phase to NEUTRAL
• Used for checking earth resistance and continuity tester 2kΩ ranges
• Can be used for RCD tester Type S, Type G and AC ramp test routines
• Used with MOSFET phase sequence tester configurations in distribution work

What power source does it use and how is portability affected?

It is battery‑powered using AA cells which enables handheld field operation without mains dependency.

Which safety categories and protection ratings apply to its use?

The instrument meets CAT IV and CAT III safety levels and has an IP40 rating for protection against solid objects.

What connectivity and data options are available for reporting?

A USB Interface allows downloadable data extraction for documentation and analysis.

What test types are available for RCD and insulation verification?

It supports Type S, Type G and AC RCD tests, automatic routines and ramp testing alongside insulation resistance measurement.

How are loop and earth measurements performed?

It performs loop impedance measurements between phase and NEUTRAL and between phase and earth, and also measures earth resistance.

Standards

IEC 60364

Supplied with

The Fluke 1664 FC comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.