Fluke 1664FC DE Multifunction Tester 1000V Earth Resistance Measurement With USB

N° de stock RS:: 241-6470
Numéro d'article Distrelec:: 302-57-568
Référence fabricant:: 1664FC DE FTT KIT
Fabricant:: Fluke

Fluke 1664FC DE Multifunction Tester 1000V Earth Resistance Measurement With USB

Sous-total (1 unité)*

2 410,00 €

(TVA exclue)

2 916,10 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

30 unité(s) expédiée(s) à partir du 13 avril 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	2 410,00 €

*Prix donné à titre indicatif

N° de stock RS:: 241-6470
Numéro d'article Distrelec:: 302-57-568
Référence fabricant:: 1664FC DE FTT KIT
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Product Type	Multifunction Tester
	Loop Impedance Test Type	Phase to Neutral, Phase to Earth
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number	1664FC DE
	Non-Tripping	No
	Insulation Test Voltage	1000V
	Maximum Voltage Measurement	500V
	Test Type	SSR Isolated Flyback Converter
	Earth Resistance Measurement	Yes
	Interface Type	USB
	RCD Test Type	Type S, Type G, AC
	Length	10mm
	Weight	1.3kg
	Standards/Approvals	EN 61557-7, EN/IEC 61010-1, EN 61557-1, EN/IEC 61010-2-034, EN 61557-10
	Height	12.5mm
	Width	25mm
	Test Standards	No
	IP Rating	IP40
	Battery Type	AA
	Safety Category Voltage	500V
	Minimum Continuity Resistance	200Ω
	Maximum Continuity Resistance	2000Ω
	Safety Category Level	CAT III, CAT IV
	Power Source	Battery

	Sélectionner tout
	Marque Fluke
	Product Type Multifunction Tester
	Loop Impedance Test Type Phase to Neutral, Phase to Earth
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number 1664FC DE
	Non-Tripping No
	Insulation Test Voltage 1000V
	Maximum Voltage Measurement 500V
	Test Type SSR Isolated Flyback Converter
	Earth Resistance Measurement Yes
	Interface Type USB
	RCD Test Type Type S, Type G, AC
	Length 10mm
	Weight 1.3kg
	Standards/Approvals EN 61557-7, EN/IEC 61010-1, EN 61557-1, EN/IEC 61010-2-034, EN 61557-10
	Height 12.5mm
	Width 25mm
	Test Standards No
	IP Rating IP40
	Battery Type AA
	Safety Category Voltage 500V
	Minimum Continuity Resistance 200Ω
	Maximum Continuity Resistance 2000Ω
	Safety Category Level CAT III, CAT IV
	Power Source Battery

Pays d'origine :: SG

Fluke Multifunction Tester, 1000V Insulation Test Voltage, 500V Maximum Voltage Measurement - 1664FC DE FTT KIT

This multifunction tester is a portable electrical installation instrument designed for verifying fixed wiring safety in domestic, commercial and industrial environments. It combines automated test sequencing with wireless data transfer capability and a safety pretest that halts insulation measurements if connected appliances are detected, reducing the risk of damage to peripheral equipment.

Features & Benefits

• Auto Test sequence reduces test time by up to 40%
• Insulation PreTest stops insulation when appliances detected
• Insulation test up to 1000V for comprehensive resistance checks
• Continuity testing at 1mA with up to 2000 Ω measurement range
• Loop impedance measurements phase to NEUTRAL and phase to earth
• RCD ramp and automatic RCD test including Type S and Type G

Applications

• Suitable for installation verification to IEC 60364 requirements
• Ideal for periodic inspection and certification of fixed wiring
• Used for commissioning new electrical installations in buildings
• Can be used for fault-finding on RCD-protected circuits
• Suitable for contractors needing wireless result sharing on-site

What power source and portability features does it use?

It runs from six AA batteries and includes a hard carrying case and shoulder strap for field mobility.

How are measurement records transferred and stored?

Measurements can be sent wirelessly to a smartphone via a mobile app and saved to Cloud storage for later retrieval and certificate generation.

What safety and overvoltage categories apply to measurements?

The instrument meets CAT III 500V and CAT IV 300V overvoltage classifications for safe use on distribution and supply-side circuits.

Can it perform earth resistance measurements and what output does it use?

Yes

earth resistance ranges include 200 Ω and 2000 Ω using a 128Hz test frequency with a 25V output.