Infineon BSP88 N-Channel MOSFET, 350 mA, 240 V Enhancement, 4-Pin SOT-223 BSP88H6327XTSA1

N° de stock RS:: 218-2982
Référence fabricant:: BSP88H6327XTSA1
Fabricant:: Infineon

Infineon BSP88 N-Channel MOSFET, 350 mA, 240 V Enhancement, 4-Pin SOT-223 BSP88H6327XTSA1

Sous-total (1 paquet de 50 unités)*

27,55 €

(TVA exclue)

33,35 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

850 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 1 000 unité(s) expédiée(s) à partir du 19 novembre 2026
Plus 1 000 unité(s) expédiée(s) à partir du 21 janvier 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
50 +	0,551 €	27,55 €

*Prix donné à titre indicatif

N° de stock RS:: 218-2982
Référence fabricant:: BSP88H6327XTSA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Product Type	MOSFET
	Channel Type	N
	Maximum Continuous Drain Current Id	350mA
	Maximum Drain Source Voltage Vds	240V
	Package Type	SOT-223
	Series	BSP88
	Mount Type	Surface
	Pin Count	4
	Maximum Drain Source Resistance Rds	6Ω
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	4.5nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	1.8W
	Maximum Gate Source Voltage Vgs	20V
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	150°C
	Height	1.8mm
	Width	3.7mm
	Standards/Approvals	No
	Length	6.7mm
	Automotive Standard	AEC-Q101

	Sélectionner tout
	Marque Infineon
	Product Type MOSFET
	Channel Type N
	Maximum Continuous Drain Current Id 350mA
	Maximum Drain Source Voltage Vds 240V
	Package Type SOT-223
	Series BSP88
	Mount Type Surface
	Pin Count 4
	Maximum Drain Source Resistance Rds 6Ω
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 4.5nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 1.8W
	Maximum Gate Source Voltage Vgs 20V
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 150°C
	Height 1.8mm
	Width 3.7mm
	Standards/Approvals No
	Length 6.7mm
	Automotive Standard AEC-Q101

Datasheet - BSP88H6327XTSA1

Infineon BSP88 Series MOSFET, 240V Maximum Drain Source Voltage, 1.8W Maximum Power Dissipation - BSP88H6327XTSA1

This MOSFET is a high-voltage N-channel transistor designed for surface-mount power switching and control in demanding environments. It operates across a wide temperature range suitable for automotive applications and provides enhancement-mode switching with gate protection suitable for typical control voltages.

Features and Benefits:

• 240V drain-source rating enables high-voltage switching capability
• 6Ω maximum Rds reduces conduction losses in low-current circuits
• 350mA continuous drain current supports moderate current loads
• 4.5nC typical gate charge allows Faster gate transitions
• 1.8W power dissipation accommodates moderate thermal loads
• 20V gate-source limit provides defined gate protection margin

Applications

• Suitable for automotive sensor Interface circuits
• Ideal for isolated high-voltage control stages
• Used with battery-management or auxiliary systems
• Can be used for board-level power sequencing
• Suitable for low-power motor driver control

What temperature span can it tolerate during operation?

The device is rated to operate from -55°C up to 150°C.

How is the device intended to be mounted on a PCB?

It is supplied in a SOT-223 package for surface-mount assembly.

What package pin count should designers expect?

There are four pins available for circuit connections.

What channel type and mode define its switching behaviour?

It is an N-channel device operating in enhancement mode.

Which automotive standard does it meet for qualification?

It complies with the AEC-Q101 automotive component standard.