Infineon OptiMOS 5 Type N-Channel MOSFET, 180 A, 60 V Enhancement, 7-Pin TO-263

N° de stock RS:: 178-7445
Référence fabricant:: IPB010N06NATMA1
Fabricant:: Infineon

Infineon OptiMOS 5 Type N-Channel MOSFET, 180 A, 60 V Enhancement, 7-Pin TO-263

Sous-total (1 bobine de 1000 unités)*

3 001,00 €

(TVA exclue)

3 631,00 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	la bobine*
1000 +	3,001 €	3 001,00 €

*Prix donné à titre indicatif

N° de stock RS:: 178-7445
Référence fabricant:: IPB010N06NATMA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Product Type	MOSFET
	Channel Type	Type N
	Maximum Continuous Drain Current Id	180A
	Maximum Drain Source Voltage Vds	60V
	Package Type	TO-263
	Series	OptiMOS 5
	Mount Type	Surface
	Pin Count	7
	Maximum Drain Source Resistance Rds	1.5mΩ
	Channel Mode	Enhancement
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	300W
	Typical Gate Charge Qg @ Vgs	208nC
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	175°C
	Standards/Approvals	No
	Height	9.45mm
	Length	10.31mm
	Automotive Standard	No

	Sélectionner tout
	Marque Infineon
	Product Type MOSFET
	Channel Type Type N
	Maximum Continuous Drain Current Id 180A
	Maximum Drain Source Voltage Vds 60V
	Package Type TO-263
	Series OptiMOS 5
	Mount Type Surface
	Pin Count 7
	Maximum Drain Source Resistance Rds 1.5mΩ
	Channel Mode Enhancement
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 300W
	Typical Gate Charge Qg @ Vgs 208nC
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 175°C
	Standards/Approvals No
	Height 9.45mm
	Length 10.31mm
	Automotive Standard No

IPB010N06N OptiMOS 3 Power Transistor

Statut RoHS : Exempté

Infineon OptiMOS 5 Series MOSFET, 60V Drain Source Voltage, 180A Continuous Drain Current - IPB010N06NATMA1

This MOSFET is a high-current N-channel enhancement device designed for power switching in surface-mounted applications. It operates across an extended temperature range and is suited to demanding electrical environments where low conduction losses and robust gate control are required.

Features and Benefits:

• 60V drain rating enabling medium-voltage switching capabilities
• 1.5mΩ Rds(on) reducing conduction losses for high-current paths
• 180A continuous drain current supporting heavy load demands
• 300W maximum power dissipation allowing sustained thermal loading
• 208nC typical gate charge enabling predictable switching behaviour
• 20V maximum gate-source voltage protecting gate drive limits

Applications

• Suitable for high-current DC-DC converters in power systems
• Ideal for server and telecoms power distribution modules
• Used with motor controllers requiring low on-resistance switches
• Can be used for battery management and power conditioning
• Appropriate for general purpose power stages in industrial electronics

What thermal range can the device withstand during operation?

It functions across -55°C to 175°C enabling use in both cold-start and high-heat environments.

How is it intended to be mounted on a board?

The component is supplied in a TO-263 package designed for surface-mount placement and soldering.

What gate drive considerations should be observed?

The gate must not exceed 20V Vgs and the typical gate charge of 208nC should be considered when sizing drivers to meet switching speed and loss targets.

Which forward voltage is relevant during body-diode conduction?

The forward conduction voltage is approximately 1.2V and should be included in loss calculations for reverse-current events.