Références fabricant

Honeywell Pin Plunger Micro Switch, Right Angle PCB Terminal Terminal, 6A, 250 V, SPDT, IP40

N° de stock RS:: 205-6118
Référence fabricant:: ZM160C50A01
Fabricant:: Honeywell

Honeywell Pin Plunger Micro Switch, Right Angle PCB Terminal Terminal, 6A, 250 V, SPDT, IP40

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 205-6118
Référence fabricant:: ZM160C50A01
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Pin Plunger
	Product Type	Micro Switch
	Terminal Type	Right Angle PCB Terminal
	Housing Material	PBT
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	150g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Contact AC Voltage	250V
	Microswitch Type	Subminiature
	Width	6.4mm
	Depth	10.2mm
	Standards/Approvals	UL, RoHS, REACH, ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE
	Hazardous Area Certification	No
	Mechanical Life	1000000min
	Length	19.8mm
	Series	ZM1

	Sélectionner tout
	Marque Honeywell
	Actuator Type Pin Plunger
	Product Type Micro Switch
	Terminal Type Right Angle PCB Terminal
	Housing Material PBT
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 150g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Contact AC Voltage 250V
	Microswitch Type Subminiature
	Width 6.4mm
	Depth 10.2mm
	Standards/Approvals UL, RoHS, REACH, ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE
	Hazardous Area Certification No
	Mechanical Life 1000000min
	Length 19.8mm
	Series ZM1

Pays d'origine :: CN

Honeywell ZM1 Series Micro Switch, 6A Contact Current, IP40 - ZM160C50A01

This micro switch is a Compact electromechanical device designed to detect and interrupt circuits in PCB‑mounted equipment. It is intended for use where a small, precise actuator is required to provide single‑pole changeover switching within control and sensing assemblies across electrical and mechanical systems.

Features and Benefits:

• Pin‑plunger actuator for precise mechanical actuation and repeatability
• Right‑angle PCB terminals for straightforward board mounting and assembly
• Rated for 6A contact current to handle moderate load switching
• Operational range from −40°C to 125°C for wide temperature applications
• Subminiature construction enabling space‑saving designs
• Conforms to multiple safety standards to support regulatory acceptance

Applications

• Suitable for position sensing in industrial automation modules
• Ideal for limit switching in mechanical assemblies and actuators
• Used with control PCBs in consumer appliances and equipment
• Can be used for signal interruption in instrumentation panels

How many operation cycles can I expect from this switch?

The device is specified for 400 mechanical cycles, indicating suitability for intermittent or low‑duty applications.

What contact arrangement does it provide for circuit design?

It offers a single‑pole changeover contact configuration allowing one input to be routed between two outputs.

Which Terminal orientation is provided for PCB integration?

The switch uses right‑angle PCB terminals to facilitate low‑profile board mounting and soldering.

What approvals support its use in certified assemblies?

It carries recognitions including UL, cUL, ENEC to IEC 61058‑1, RoHS, REACH, CQC and CE, aligning with multiple regional standards.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.