Références fabricant

Honeywell Pin Plunger Micro Switch, PCB Terminal Terminal, 100mA, 250 V, SPDT, IP40

N° de stock RS:: 205-6114
Référence fabricant:: ZM110D20A01
Fabricant:: Honeywell

Honeywell Pin Plunger Micro Switch, PCB Terminal Terminal, 100mA, 250 V, SPDT, IP40

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 205-6114
Référence fabricant:: ZM110D20A01
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Pin Plunger
	Product Type	Micro Switch
	Terminal Type	PCB Terminal
	Housing Material	PBT
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	95g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Contact AC Voltage	250V
	Microswitch Type	Subminiature
	Series	ZM1
	Width	6.4mm
	Standards/Approvals	RoHS, UL, CE, CQC, CQC to GB 15092.1, cUL to UL 61058-1, ENEC to IEC 61058-1, REACH
	Hazardous Area Certification	NO
	Mechanical Life	1000000min
	Length	19.8mm
	Depth	10.2mm

	Sélectionner tout
	Marque Honeywell
	Actuator Type Pin Plunger
	Product Type Micro Switch
	Terminal Type PCB Terminal
	Housing Material PBT
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 95g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Contact AC Voltage 250V
	Microswitch Type Subminiature
	Series ZM1
	Width 6.4mm
	Standards/Approvals RoHS, UL, CE, CQC, CQC to GB 15092.1, cUL to UL 61058-1, ENEC to IEC 61058-1, REACH
	Hazardous Area Certification NO
	Mechanical Life 1000000min
	Length 19.8mm
	Depth 10.2mm

Honeywell ZM1 Series Micro Switch, 125°C Maximum Operating Temperature, 100mA Switch Contact Current - ZM110D20A01

This micro switch is a Compact electromechanical device designed to register mechanical position changes and deliver reliable electrical switching in tight electronic assemblies. It employs a pin plunger actuator and is intended for PCB mounting, providing a small-footprint solution for control panels, sensor interfaces and automated mechanisms where a miniature, Durable switching element is required.

Features and Benefits:

• Subminiature form factor enables space-constrained installation
• Pin plunger actuator provides positive tactile engagement
• SPCO contact arrangement supports single-pole circuit control
• PCB terminals ensure secure board-level connectivity
• Rated for 100mA contact current for low-power signalling
• Operates from -40°C to125°C for wide thermal tolerance

Applications

• Suitable for end-stop detection in automated equipment
• Ideal for position feedback in Compact actuators
• Used with control PCBs in consumer appliances
• Can be used for limit sensing in mechanical assemblies
• Suitable for low-current signal switching in instrumentation

What Terminal type should I expect for soldering to a board?

The unit uses PCB terminals specifically configured for through-board mounting and solder connection to printed circuit boards.

How many switching circuits does it provide and what is the contact arrangement?

It provides a single-pole changeover arrangement, allowing one input to be routed to two different outputs as the actuator moves.

What approvals and regulatory marks accompany this device?

It carries multiple industry approvals including RoHS, UL, ENEC and CQC, as well as compliance with relevant standards and REACH.

How many mechanical cycles is it specified for?

The mechanism is specified for 400 cycles of mechanical operation.

What environmental protection does the enclosure offer?

The switch has an IP40 ingress rating, providing protection against solid objects greater than 1mm but not against water ingress.