Honeywell Lever Micro Switch, Solder Terminal, 100 mA, SPCO, IP40

Voir l’ensemble des Micro Switches
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
205-6128
Référence fabricant:
ZM110D10C01
Fabricant:
Honeywell
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Honeywell

Product Type

Micro Switch

Actuator Type

Lever

Terminal Type

Solder

Switch Contact Current

100 mA

Contact Configuration

SPCO

IP Rating

IP40

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Microswitch Type

Subminiature

Length

19.8mm

Standards/Approvals

UL, RoHS, REACH, ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE

Hazardous Area Certification

No

Mechanical Life

400Cycles

Depth

10.2mm

Series

ZM1

Pays d'origine :
CN

Honeywell ZM1 Series Micro Switch, IP40, 100mA Switch Contact Current - ZM110D10C01


This micro switch is a Compact electromechanical switch designed to detect and respond to mechanical movement in control systems and equipment. It features a lever actuator and is intended for applications where a small, discrete switching element is required within electrical, electronic and mechanical assemblies.

Features and Benefits:


• Solder Terminal type simplifies PCB or wire connection
• SPCO contact arrangement enables single-pole changeover switching
• Rated switch contact current of 100 mA supports low-power circuits
• Operating temperature range from -40°C to 125°C suits harsh environments
• Mechanical life of 400 cycles provides predictable actuation durability

Applications


• Suitable for end-of-travel detection in industrial actuators
• Ideal for position sensing in small automation equipment
• Used for limit switching in electromechanical assemblies
• Can be used for control inputs in instrumentation panels

What approvals confirm safe use in regulated projects?


It carries multiple safety and environmental approvals including UL, cUL, ENEC to IEC 61058-1, CQC and complies with RoHS and REACH requirements.

How is the actuator configured for mechanical integration?


A lever-type actuator provides a mechanical Interface that converts small mechanical movements into switch operations for linkage or cam-driven mechanisms.

What class of microswitch is this and how does that affect installation?


It is a subminiature microswitch, permitting installation where space is limited and allowing integration into Compact assemblies.

What environmental protection does it provide against solids and liquids?


The enclosure meets an IP40 rating, offering protection against objects greater than 1mm but no special sealing against liquids.

Liens connexes