Honeywell GLD Series Rod Limit Switch, 1 NC/1 NO, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 10A

N° de stock RS:: 808-3176
Référence fabricant:: GLDA01A4J
Fabricant:: Honeywell

Honeywell GLD Series Rod Limit Switch, 1 NC/1 NO, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 10A

Sous-total (1 unité)*

118,26 €

(TVA exclue)

143,09 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

34 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	118,26 €

*Prix donné à titre indicatif

N° de stock RS:: 808-3176
Référence fabricant:: GLDA01A4J
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Rod
	Product Type	Limit Switch
	Contact Configuration	1 NC/1 NO
	IP Rating	IP66
	Housing Material	Fibreglass Reinforced Thermoplastic
	Contact Type	Snap Action
	Switching Current	10A
	Series	GLD
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Length	68.5mm
	Depth	26.35mm
	Standards/Approvals	CSA, CCC, UL, CE
	Hazardous Area Certification	No
	Operating Force	0.12N
	Mechanical Life	10000000Cycles
	Conduit Entry	0.5 to 14 NPT

	Sélectionner tout
	Marque Honeywell
	Actuator Type Rod
	Product Type Limit Switch
	Contact Configuration 1 NC/1 NO
	IP Rating IP66
	Housing Material Fibreglass Reinforced Thermoplastic
	Contact Type Snap Action
	Switching Current 10A
	Series GLD
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Length 68.5mm
	Depth 26.35mm
	Standards/Approvals CSA, CCC, UL, CE
	Hazardous Area Certification No
	Operating Force 0.12N
	Mechanical Life 10000000Cycles
	Conduit Entry 0.5 to 14 NPT

Honeywell GLD Series Limit Switch, 10A Switching Current, IP66 - GLDA01A4J

This limit switch provides a Compact electromechanical sensing solution for industrial control and automation. It detects mechanical position changes via a rod actuator and delivers discrete switching outputs for control systems in manufacturing, assembly and safety interlock contexts. The enclosure offers protection against dust and water ingress for use in demanding environments.

Features and Benefits:

• Snap action contact for Rapid reliable state changes
• 1NC and 1NO contact arrangement for flexible control logic
• Rated switching 240V AC and 250V DC for mixed-voltage systems
• Operating force 0.12N enabling sensitive actuation response
• Mechanical endurance 10000000 cycles for extended duty cycles
• IP66 ingress protection for washdown and dusty locations

Applications

• Suitable for conveyor end-of-travel detection in production lines
• Ideal for machine guard interlocks in assembly stations
• Used with actuated valves to confirm open/closed positions
• Can be used for limit sensing on automated handling equipment
• Used for positional feedback in robotics and pick-and-place units

What materials resist corrosive and humid conditions?

The housing is MADE from fibreglass-reinforced thermoplastic which provides chemical resistance and dimensional stability in moist atmospheres.

What operating temperatures can it withstand during continuous use?

It is rated to function between -40°C and 85°C, supporting both cold-store and moderately high-temperature plant environments.

How is the switch routed for wiring and conduit entry?

Conduit entry accepts 0.5 to 1/4 NPT fittings to accommodate standard industrial cable glands and conduit sizes.

What approvals support installation in regulated electrical systems?

The unit holds CSA, CCC, UL and CE approvals, aligning with common international safety standards.

How Compact is the switch for tight installations?

The actuator-equipped body measures 68.5mm in length and 30.5mm in width, suitable for constrained mounting spaces.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.